Re: KH Beam Hauler
 

Depends on what you are trying to secure and to what are you trying to secure it to. FMCSA 49CFR393.

Re: KH Beam Hauler
 

It all depends on that shackle, as well as the binder rating. Are they made in the U.S.A.? If so, they will be stamped clearly for their working load rating.

Re: KH Beam Hauler
 

Oh Lord, I have to go for Exemptions........My goal was to be able to get the load easy and safe secured, and kind of look scale. also when traveling to different shows, don't have to spend too much time assembly all the stuff.:cop:
However, I got pulled over a few times in the UK. so I take it seriously.
Thanks for the input Zabco, Skeeter.

Re: KH Beam Hauler
 

Components used for securing loads do NOT have to be marked with their working load limits as do components used for hoisting/lifting loads (completely different set of regulations). However if not marked, there are tables in the FMCSA load securement rules that give maximum allowable loading based on size and type of material. Rules also give guidance based on type and size of load and type of vehicle it is being carried on what is required in type, number and positioning of tie-downs. If you are a bit familiar with what is required in the real world and know what real world size of components are then it isn't too hard to come up with scaled components that look correct. In truth, if your sample tie down link is for what I think you are trying to do it will probably scale up to much larger than needed in real world.

Re: KH Beam Hauler
 

Heh, i hope Skeeter and Zabco don't build police interceptors so they can go looking for violations at shows. Then after that someone'll make an OSHA figure or Mine Safety guy...

Do the truck enforcement guys over there in the UK use station wagons to haul the extra truck checking equipment, or were they running normal cop cars to harass you?

(Bring donuts, the guy with a cop car will want to eat them and will drive less to avoid getting donut glaze on the remote)

As someone not involved in trucking or hauling, I might try to put a side handle on the turnbuckle so it looks more like a ratcheting load binder.

Re: KH Beam Hauler
 

Well, the first batch is done. Now over to test and classification. [IMG]https://farm2.staticflickr.com/1886/...50205433_b.jpgIMG_3267 by Bo Wallen, on Flickr[/IMG]

Let's hope it works. :cop:

Re: KH Beam Hauler
 

Yes, I did heavy haul in Europe for thirty years, so I know what's needed over there. I also over secured all my loads for a piece of mind. Never had a law enforcement person complain. However, it's hard to find the scale stuff that looks and works well. And yes a handle is coming for the turnbuckle, just need to make some decent ones. Thank You Guys for the input, It.s fun to have guys that take their time to interact.

Re: KH Beam Hauler
 

A measurement insight.

[IMG]https://farm2.staticflickr.com/1861/...2d220907_b.jpgIMG_3268 by Bo Wallen, on Flickr[/IMG]

[IMG]https://farm2.staticflickr.com/1868/...672e3a01_b.jpgIMG_3269 by Bo Wallen, on Flickr[/IMG]

Re: KH Beam Hauler
 

Variations in securing loads.

[IMG]https://farm2.staticflickr.com/1881/...9f190226_b.jpgIMG_3271 by Bo Wallen, on Flickr[/IMG]

Re: KH Beam Hauler
 

Thats the big problem. Even as big as 1/14 scale seems, truly scaled down items are tiny and hard to handle. I use chain for tiedowns that has links 1mm in diameter. That scales to over 1/2 inch diameter in the real world. Unless you are trying to tie down something really massive most guys are going to use 3/8" chain. Simply too small to use at scale size if you could even find it.

Looks like your turnbuckles are using 3mm screws? Close to 1 3/4 inch in real world, pretty **** stout.

Re: KH Beam Hauler
 

Zabco, i think you figured out why so many of the action figures are built like power lifters instead of normal people.

You'd be built too if everything was secured with 1 3/4" solid rods with bigger hardware, and log chains. Even my little 'ratchet straps' are 4" wide.
"Bro, do you even lift?"

Re: KH Beam Hauler
 

Yes, I'm kind of tired of finding right scale parts, and who knows how many different scales there is in Tamiya Trucks if you start measuring parts. So if it looks cool and does what I need I'm OK with that. And if you go to a show, More than half of the audience would not see the fake scale anyway. Only hardcore professionals would suffer. And I'. OK with that too. :cop:

Re: KH Beam Hauler
 

I forgot to say there is a crane at each end, so they have to deal with oversized
stuff. My back hurts anyway. :lol:

Re: KH Beam Hauler
 

They look very nice!

Re: KH Beam Hauler
 

Thank You Much. Emil. Only need to make 40 more, and a few other special models for a special load.
This is part play an important role.

[IMG]https://farm2.staticflickr.com/1912/...bd6f45c9_b.jpgIMG_2254 by Bo Wallen, on Flickr[/IMG]

Re: KH Beam Hauler
 

ACHTUNG!



Therapeutic Sunday :eek:

[IMG]https://farm2.staticflickr.com/1858/...2c800874_b.jpgIMG_3286 by Bo Wallen, on Flickr[/IMG]

Getting closer. I think I got this. :bounce:

Re: KH Beam Hauler
 

fabulous bo!!! I haven't been on site in a while , have to back read some good stuff!!

Re: KH Beam Hauler
 

Thank You, Cooper. Yes and I admire your work. Well, I'm getting closer just 7 more to go of this.

[IMG]https://farm2.staticflickr.com/1968/...64147968_b.jpgIMG_3294 by Bo Wallen, on Flickr[/IMG]

I might be able to get a roller soon.

Re: KH Beam Hauler
 

Axle Done WooHoo!

[IMG]https://farm2.staticflickr.com/1963/...d7a264ee_b.jpgIMG_3300 by Bo Wallen, on Flickr[/IMG]

Now over to framework, steering, and other goodies.

Re: KH Beam Hauler
 

A while back I fixed the upper part of the north wall. And now time for the lower part. 17'4" new workbench and some nice paint, and LED Lights.

[IMG]https://farm2.staticflickr.com/1908/...86728a4e_b.jpgIMG_3309 by Bo Wallen, on Flickr[/IMG]

[IMG]https://farm2.staticflickr.com/1906/...0b56522a_b.jpgIMG_3316 by Bo Wallen, on Flickr[/IMG]

Bonus in this project is added workbench on the east wall too.6 feet.

Re: KH Beam Hauler
 

Good work Bo, can never have too much bench top
Space ;)

On another note, how far along have you gotten on your garage/workshop
this summer?

Re: KH Beam Hauler
 

Thanks, Joe. I'm keeping the workspace in the basement, with some upgrades for the RC trucks. The shop area is all excavated except a bunch of boulders in VW beetle size. Need to crack them into smaller pieces to be able to move them out and away. This year was supposed to be a year of not much work, had more work than ever. So time for the shop build hasn't been there yet. Hope to resume soon.

Re: KH Beam Hauler
 

Small Sunday update. Jackhammer coming for the boulders. woohoo! While waiting for that, the 300 feet driveway to Dogville play area on the way.

[IMG]https://farm2.staticflickr.com/1907/...a996e93a_b.jpgIMG_3321 by Bo Wallen, on Flickr[/IMG]

Re: KH Beam Hauler
 

Updating on the shop continued. Workbench/Highway. :) Gettin' there :D

[IMG]https://farm2.staticflickr.com/1951/...0cd913ca_b.jpgIMG_3357 by Bo Wallen, on Flickr[/IMG]

Re: KH Beam Hauler
 

And the helper was..........



[IMG]https://farm2.staticflickr.com/1953/...2cef452a_b.jpgIMG_3348 by Bo Wallen, on Flickr[/IMG]



:lol:

Re: KH Beam Hauler
 

I LOVE that idea! If I had better than a plastic folding table as a workbench, I just may steal that idea.............but I don't.

Re: KH Beam Hauler
 

Thanks, Skeeter. any table can be upgraded to a road. :lol:

[IMG]https://farm2.staticflickr.com/1913/...418118dd_b.jpgIMG_3361 by Bo Wallen, on Flickr[/IMG]

Re: KH Beam Hauler
 

Light and Standard outlet 2 Socket & Dual USB Ports Wall Mount Power Plate :D Tired of extension cords all over the place.

[IMG]https://farm2.staticflickr.com/1977/...f74c9559_b.jpgIMG_3397 by Bo Wallen, on Flickr[/IMG]

Re: KH Beam Hauler
 

Amen, no such thing as too many outlets.

Re: KH Beam Hauler
 

Thanks, Zabco. Now there is an outlet every 5 feet, and then some :D

Re: KH Beam Hauler
 

A bit of time in the east corner. Slowly moving in stuff. :)

[IMG]https://farm2.staticflickr.com/1931/...cf279ac6_b.jpgIMG_3405 by Bo Wallen, on Flickr[/IMG]

Re: KH Beam Hauler
 

The first client showed up on the new Workarea :eek: Oh Well :lol:

[IMG]https://farm2.staticflickr.com/1910/...4b1aa58a_b.jpgIMG_3407 by Bo Wallen, on Flickr[/IMG]

A test is always good to do.

Re: KH Beam Hauler
 

Am i the only one thinking the 2 lane blacktop needs the white Stop Here line at the intersection with the wood wrapped bench?

Maybe like a rolling hills and sky kind of mural on the block wall...

Too many outlets and lights are a nice problem to have

Re: KH Beam Hauler
 

Thanks, Frizzen. Yes, a great idea. I think people will get tired of this photobombing soon. :lol: Until that occurs I will keep adding stuff and gadgets, Snapp a picture or two every now and then.....I feel inspired to get the really big build going soon Until that happens. Keep clapping and stay warm.

Re: KH Beam Hauler
 

Hey, a little break in the shop overhaul. Let's test the workspace a bit with something different.

Got a new fella from Amazon, completely out of scale, or not. After some hacks, it should be a useful machine.

[IMG]https://farm2.staticflickr.com/1912/...fb644f98_b.jpgIMG_3408 by Bo Wallen, on Flickr[/IMG]

Put some Tamiya wheels next to it for comparing the size.

[IMG]https://farm2.staticflickr.com/1962/...b183fc87_b.jpgIMG_3409 by Bo Wallen, on Flickr[/IMG]

I also figure out some of the recipes for the makeover.

[IMG]https://farm5.staticflickr.com/4917/...6cf997e8_b.jpgIMG_3419 by Bo Wallen, on Flickr[/IMG]

After some serious hacks, it should turn out somewhat like this one.

[IMG]https://farm5.staticflickr.com/4867/...cc43b6d5_b.jpgKalmar by Bo Wallen, on Flickr[/IMG]

Oh well let the cutting begin, order some more parts.

Re: KH Beam Hauler
 

A bit more parts lined up. Soon time to do the mockup.

[IMG]https://farm5.staticflickr.com/4854/...4eec7075_b.jpgIMG_3442 by Bo Wallen, on Flickr[/IMG]

Re: KH Beam Hauler
 

I am looking forward to the next step!

Kerst

Re: KH Beam Hauler
 

Nice!
I was wondering when someone would start making one into a Hyster or container stacker. I didn't realize they were big enough that semi wheels fit.

Re: KH Beam Hauler
 

Next step, Kerst. And a few more to make.

[IMG]https://farm5.staticflickr.com/4832/...053a9b6c_b.jpgIMG_3450 by Bo Wallen, on Flickr[/IMG]

Built the chassie and testdrive went great. Now to hook up the mast, winches and a body.

[IMG]https://farm5.staticflickr.com/4879/...a2ef68e3_b.jpgIMG_3451 by Bo Wallen, on Flickr[/IMG]

Frizzen, This is so much fun. Trying to block my calendar for unnecessary work, so i can finish this bugger.

Re: KH Beam Hauler
 

I forgot I had this picture that show better the semi wheels.

[IMG]https://farm5.staticflickr.com/4881/...fd88c50f_b.jpgIMG_3410 by Bo Wallen, on Flickr[/IMG]