Re: JBC limited NZ
Quote:
|
Re: JBC limited NZ
http://i1322.photobucket.com/albums/...ps8b6758aa.jpg
http://i1322.photobucket.com/albums/...psb30283c3.jpg cheers for the positive comments, Im trying to make this look right , it getting there, front light brackets in paint and a few more decals done, will have a few beers and look at it, not sure that Im happy yet but getting there, maybe it just needs a little more dirt on it. |
Re: JBC limited NZ
Hey Andy ,you sure have a awesome fleet ,keep up the great work !!:D
|
Re: JBC limited NZ
|
Re: JBC limited NZ
all right time for some updates.
excavator: ordered a sound card from eagle machinery ( same as my loader) and crammed it into the excavator, am running it of the 4th valve so after my Y cable (signal reversing) turns up it should be all go.http://i1322.photobucket.com/albums/...ps2c51085b.jpg have also made a few decals for the rock truck, http://i1322.photobucket.com/albums/...ps854c2836.jpg also had a slight problem with the loader. had a rear wheel come loose from the axial, emailed tang at eagle machinery and got a detailed how to do , remove wheel, remove ring gear, pull axial, pull washer , look inside and find 4 small bolts holding planetary gear to axial housing tighten up and all good.http://i1322.photobucket.com/albums/...pseef4cbf1.jpg http://i1322.photobucket.com/albums/...ps6279d0f6.jpg new drive motors for excavator have turned up so will fit those when I have a bit of time, also front fenders for loader here and painted.http://i1322.photobucket.com/albums/...ps51834bb4.jpg also have eight more diggers, early one morning on my way to the shed for a bit of play time and I spot this. http://i1322.photobucket.com/albums/...ps306eb21e.jpg |
Re: JBC limited NZ
http://youtu.be/VR1NbwjUCOU
heres a real quick video of the sound card, flat battery. you can see how the revs drop when the sticks are moved, the signal reversing lead will fix this. cheers andy:bounce: |
Re: JBC limited NZ
heres a better video showing the issues I have .
sound card wont shut down, because Im using the 4th bypass when there is no stick movement the revs are high. in order to shut down the sound card I have to stop pump, use a stick , drop sound card revs then use a track and all shuts down. when the reversing lead shows up all these steps will be gone, hopefully:D https://www.youtube.com/watch?v=Hprhm-bqzXs |
Re: JBC limited NZ
Andy you got that machine looking amazing and she seems to be running nicely keep up the good work
|
Re: JBC limited NZ
thanks, since Im not allowed a real one I will stick with the little ones, problem with that is theres all these little things you can do to make them more life like, adding the sound changes everything , then theres lights and paint and ,and OMG this is getting out of control.
time to go and replace track motors and have a play, need to get my RC fix today. cheers andy |
Re: JBC limited NZ
Have just finnished installing the new track drive motors.
Found out why the tracks were jumping, I have sheared both pins; probaly due to driving small gravel and ignoring the bad sounds . I didnt have 2mm by 35mm pins lying around . measured a few pop rivets and they are a perfect fit. 1 battery flat , new motors work sweet and the pins are still going strong. |
Re: JBC limited NZ
ok, finally bit the bullet and got another lowboy for the fleet.
was a stock standard rc4wd lowboy but it needed some upgrades. all the fleet trailers are red so ,out with the spray can. also cut up some 5mm MDF sheet and used a slitter blade in the grinder to make some fake planks. http://i1322.photobucket.com/albums/...ps7f74bbd4.jpg http://i1322.photobucket.com/albums/...pse594fa41.jpg http://i1322.photobucket.com/albums/...ps2fd50f1a.jpg |
Re: JBC limited NZ
Nice upgrades.
|
Re: JBC limited NZ
Quote:
just the right distance and angle to make the Shed look the same scale nice |
Re: JBC limited NZ
cheers paul,
waiting for better weather then a few more outside shots. got the conveyors finished and running good. need to put loader back together, had a bearing failure in the rear diff. input shaft bearing toast! got a new gear set from manufacture (free) and put some shims in around main diff gear bearing, and milled a bit of clearance for the diff lock leaver ,also rechecked front diff and fitted shims, milled a bit out the same as rear diff. need to find a bit of time for a play to see if it is all good. cheers andy http://i1322.photobucket.com/albums/...ps943243b5.jpg http://i1322.photobucket.com/albums/...ps61a8adb4.jpg |
Re: JBC limited NZ
|
Re: JBC limited NZ
Nice pictures of the trailer and loader
|
Re: JBC limited NZ
Thanks. Had to get a few while it was still all shiney..
now I need to try several batterys in the loader to see if my fix is going to be long term. I can see why the bearing failed, just really bad clearance in the castings and a lot of loading. I see this all the time at work on the cheaper electric motors that are fitted to some of the machines that get installed buy the bean counters. they wonder why maintenance cost is so hi. need I say more. dose any one know if theze are the same axial setup as the armagedon dump trucks and do thay have the same issues. |
Re: JBC limited NZ
loader up and running again, I think I've dislodged the sound module cable,
will run a few more batteries and sort as well check diffs. http://youtu.be/tJiVOInDKGA |
Re: JBC limited NZ
put loader thru so rigorous testing ( just a bit of play time)
and all going well, battery flat again so the excavator needed a bit of a work out. all going well. don't know whats up with the mic on the lap top, I may adjust it with a hammer soon. anyway heres a quick video of this mornings testing. http://youtu.be/x_vfb__pciE |
Re: JBC limited NZ
ok, finally got the signal reversing plug fitted, need to lower the revs a little but pretty happy how it works.
heres a quick video. http://youtu.be/c4xczKdO-pU |
All times are GMT -4. The time now is 08:17 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.