Re: Lesu Liebherr 574 loader kit build
Quote:
|
Re: Lesu Liebherr 574 loader kit build
scotty k: I heated the pinion with a heat gun and put the motor in the fridge. I slipped the hot pinion on the cold shaft and got an interference fit. I need to contact Lesu and get the specs of the pinion.
Lil Giant: the metal parts are aluminum, unfortunately no bushing at the pivot point. I find it weird that they did this considering they used flanged bearings for the axle pivot !! once the pivots wear out I will drill them out and put in flanged bearings. |
Re: Lesu Liebherr 574 loader kit build
Here is a video I did about the hydraulic valve block: https://youtu.be/aNGVRHwqO8E
|
Re: Lesu Liebherr 574 loader kit build
here is a video about some of the general progress on the build: https://youtu.be/eLRdwY-y-aI
|
Re: Lesu Liebherr 574 loader kit build
here a couple shots of the hydraulic valve assembly.
https://s18.postimg.org/4c91i98hx/20180306_115540.jpg url=https://postimg.org/image/e8a4hsr3p/]https://s18.postimg.org/e8a4hsr3p/20180306_115547.jpg[/url] https://s18.postimg.org/rp730qeat/20180306_115552.jpg |
Re: Lesu Liebherr 574 loader kit build
servo adapter:[url=https://postimg.org/image/t48npguth/]https://s18.postimg.org/t48npguth/20180306_115612.jpg[/url
servo adapter installed: [url=https://postimg.org/image/ct8jt4811/]https://s18.postimg.org/ct8jt4811/20180306_115633.jpg[/url The stock servo horns had to be trimmed down to fit inside the adapters, nothing a dremel cant handle. |
Re: Lesu Liebherr 574 loader kit build
The kit came with 5 Tower Pro servos, I wasn't feelin' it. I decided to run Spektrum servos, part # h3050. these servos are sub-micro heli servos.
|
Re: Lesu Liebherr 574 loader kit build
Hi
Nice build log thanks for sharing. I too would swap out the tower pro for another servo they are not bad just would not use them in a valve block so now what you mean by saying not feeling it :) |
Re: Lesu Liebherr 574 loader kit build
If you would please tell me the tire dimensions? Thanks (:
|
Re: Lesu Liebherr 574 loader kit build
Cat966c; sorry it took so long to get back to you. Tire diameter is about 4.2 inch O.D.
wheels are about 1 and 19/32 of an inch wide, dia. is approx. 2.5 inch. hope that helps. |
Re: Lesu Liebherr 574 loader kit build
Hey, awesome!! No problem man. It usually takes longer to get a response on here (no offense) so you’re good! Thanks!
|
Re: Lesu Liebherr 574 loader kit build
Hey Cat996, don't quote me but I think the wheels/tires can be ordered through Lesu. I know for a fact that the loader axles and a pass-through version of the loader axles are avail. for purchase. The fact that they have a pass-through version makes me think they have an ADT in the works.
|
Re: Lesu Liebherr 574 loader kit build
here are a couple more pics of the build:
https://s31.postimg.org/76yzjrjpj/20180321_194633.jpg this first shot is looking into the back of the front half of the frame, it shows the second hydraulic manifold. The plumbing is almost complete !! Bucket lift arms bolted up: https://s31.postimg.org/rr3tiap6v/20180321_194642.jpg Another shot of the front half: https://s31.postimg.org/4pn8cjhtj/20180321_194658.jpg |
Re: Lesu Liebherr 574 loader kit build
Here are a couple shot of the valve-block bolted up: url=https://postimg.org/image/g1ztubb2v/]https://s31.postimg.org/g1ztubb2v/20180321_194721.jpg[/url]
https://s31.postimg.org/5f60ovv7r/20180321_194728.jpg |
Re: Lesu Liebherr 574 loader kit build
look for at least one new video in the next 5-7 days. Thanks for following.
|
Re: Lesu Liebherr 574 loader kit build
Just posted the lastest video a couple hours ago; https://youtu.be/nC7stYh4Bds
|
Re: Lesu Liebherr 574 loader kit build
Some of the latest build pics: https://s31.postimg.org/etl6nm2nb/20180402_181417.jpg
finally got all the hydraulic cylinders mounted. good articulation on the bucket. https://s31.postimg.org/q23yozdiv/20180402_181434.jpg |
Re: Lesu Liebherr 574 loader kit build
Bucket raised: https://s31.postimg.org/dnh6p5tvr/20180402_181453.jpg
Big mouth: url=https://postimg.org/image/6yan8yt2f/]https://s31.postimg.org/6yan8yt2f/20180402_181549.jpg[/url] https://s31.postimg.org/vrk79pc3r/20180402_181608.jpg |
Re: Lesu Liebherr 574 loader kit build
Almost 24" in length: url=https://postimg.org/image/r5o31bg9z/]https://s31.postimg.org/r5o31bg9z/20180402_181641.jpg[/url]
|
Re: Lesu Liebherr 574 loader kit build
Couple shots of the bucket tilt cylinder: https://s31.postimg.org/nks7i4tqv/20180402_181709.jpg
https://s31.postimg.org/iyw39u5nr/20180402_181715.jpg Although this model only has one bucket-tilt cylinder it is the biggest cylinder on the loader by far. |
All times are GMT -4. The time now is 03:43 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.