Re: Yale Forklift - NewRay
 

The boss got mad they were taking too many restroom breaks
https://i.imgur.com/7bS3TM9h.jpg

But when you've gotta go, ya gotta GO!
https://i.imgur.com/6doZgm9h.jpg


The 13th Dr Poo going back to the Turdis
https://i.imgur.com/W329xBSh.jpg

Re: Yale Forklift - NewRay
 

Frizzen, you really made my day :D:D:):)

Re: Yale Forklift - NewRay
 

Hemi, i'm glad you're having fun with me too!

On one of the racks i've got a Playmobil concrete mixer, any ideas about what's missing that would make it look more realistic?

Half the time the challenge is trying to find ways to make my build threads interesting enough to get comments.

Re: Yale Forklift - NewRay
 

I always watch your builds but sometimes there just isn't anything I could add to make it any more entertaining :D

Re: Yale Forklift - NewRay
 

frizzen:

Some "concrete" made from coarse sand, grey paint/white glue that's been painted around the rim of the mixer, painted around the inside of the mixing drum, and dribbled down the sides wouldn't hurt. (That crap ALWAYS builds up around the rim.)

Maybe a few grease stains too? Along with a general "grubbying" up of the mixer. A little weathering makes a BIG difference. (Unless it's supposed to be brand new?) Oh, and DON'T forget the warning labels, gotta keep the safety Nazis happy.

Don

Re: Yale Forklift - NewRay
 

Well............Our property has been sold, & RCland will be going away. I decided to not invest anymore time & materials into improving the area, since we'll be leaving it in about 2 more months. The warehouse will be put on hold until such time that RCland 2.0 can be developed. This might could take a few years to accomplish, as I'm not yet ready to buy land that's big enough to allow an RC playground to be set up again. Land here is just too darned expensive to do so. HOPEFULLY in 2-4 years I'll find the right parcel that suits my needs/wants & can build another RC playground!

Re: Yale Forklift - NewRay
 

https://imgur.com/UVO3Ae2h.jpg

I believe i've found a scale Forklift Paradox: Sometimes new toys can become much more fun if you make them harder to play with. Snowmobile kinda fun for a few minutes. Rip out the motor, build a pallet, strap it down forever, add some detailing, suddenly much more fun to be had with it?

Also if a guy finds several of a nice looking cheap cargo, you can change up the difficulty a little. Like with these friction-motor Snowmobiles, Orange pallet has taller fork pockets than the Red one, since i grabbed a wrong dimention stick of a cut down 2x4 when i built the second. Yale and Linde forks fit almost to the rack, but its tighter. If you were doing it intentional, maybe color code ends of the cargo pallets for difficulty like the bike trails? (Blue/Green, Yellow, Orange, Red, Black.)

You also definately run into some oddities. Like the dollhouse breakroom "Coffee machine / Water cooler" pallet weighs more than the Kubota tractor with overbuilt pallet, or the 426 Hemi longblock with accessories pallet.

Re: Yale Forklift - NewRay
 

I found a place that still has the Carson forkies available! https://www.der-getriebedoktor.de/rc...-gabelstapler/

I CAN'T speak pf how they are, as I've yet to receive mine! It was ordered a month & a half ago. For some reason it was shipped, then returned to sender. They re-sent er but the delay had already happened. HOPEFULLY it gets here in time for the 2021 Northwest Model Hobby Expo on Halloween weekend!

Re: Yale Forklift - NewRay
 

That's really cool, hope your new fork shows up! Even better if it can make those events.

Speaking of unobtainable things, I've been hoping to find a place to get some stuff made by "Happy People RC" of germany:
- ''Junheinrich EFG 216k'' UPS 3-wheel forklift
- ''iveco p50 daily'' UPS delivery van

Hopefully it's not going to be like trying to go after the 'peanuts club' Toyota Hi-Ace 1/14 van that's still eluding me after a couple years.

Re: Yale Forklift - NewRay
 

The Lao Che Air-Freight company would like to wish everyone a safe and happy May 4th holiday!

https://imgur.com/6vpljzEh.jpg

https://imgur.com/5XaNau2h.jpg

https://imgur.com/s47Afj8h.jpg

https://imgur.com/apjQO5fh.jpg

https://imgur.com/BtBnymSh.jpg

May the Fourth be with you always.


----

Fine if nobody wants to celebrate 'Star Wars Day' with me, i won't Force it.

But i'm not going to share doing anything special for 'Revenge of the Sixth

Re: Yale Forklift - NewRay
 

Probably a good thing that nobody else was interested in celebrating 'StarWars Day'. A couple days later 'Revenge of the Sixth' didn't go so well over here...

https://imgur.com/CbjLSUXh.jpg

Does anybody have any suggestions on best practices for how to palletize humanoid robots? Things like: IG-88s, C-3POs, 2-1Bs, T-1000s...

Re: Yale Forklift - NewRay
 

Not sure but I'd take the batteries out first.....you know how they leak...

Re: Yale Forklift - NewRay
 

In Bi-centennial Man, "Andrew" was just shipped in a big coffin sized wooden crate. (I think it was wooden, I seem to remember them prying it open in the movie.)

Presumably the crate had the appropriate "Do Not Stack", "This Side Up", and "Fragile" labels applied - and then totally ignored. (I have on good authority that fragile is pronounced fra-GEE-lay. It's Italian donchyaknow.)

A window could be included in the coffin - I mean crate. That way the shipping dock could visually confirm that they were shipping the wrong item. (Still a little miffed about being shipped SOMEBODY ELSE'S order in case you can't tell.)

Don

Re: Yale Forklift - NewRay
 

Good idea about the batteries! Ya always gotta watch those robots...

Mmmm, 'Donut stack.'
'This side up' means keep stabbing and dropping it until UP can 'Stand in the Place that you Work and face North'.
'Fragile', weren't those the little muppets working in a mine in the show Fragile Rock?

Robot Body-sized crates could work.
But that might turn into a whole new side quest of distraction...
Might not be too hard to make a couple 'Ziegler cases' or 'Jim Wilson trays'
Find out how Batesville Casket packages theirs for truck shipment
Cheap rates with the Vampire travel agency?

Re: Yale Forklift - NewRay
 

Nope those were the Doozies! (Or was that Doozers?) Loved that radish mine. Now ya got me wondering if I can get the complete Fraggle Rock collection on DVD.

Re: Yale Forklift - NewRay
 

Not too much shaking here, been messing with a couple new pallets. But i've noticed Bruder now has a Much larger forklift, Linde HT160.

Then this RC video popped up with a Logistics Center using several machines like Carson Linde fork, Happy People RC (ups) Jungheinruch 3-wheel fork, and a Powered Pallet-Jack.
https://youtu.be/nksH40shybQ

I'm trying to figure of if that tiny pallet-jack rig was a conversion, or scratchbuild.

--
Found some files for the Bruder linde H30 from the introduction post, and other items of interest
https://www.thingiverse.com/thing:4763298

https://cults3d.com/en/3d-model/game...-rc-conversion

Printed 3-wheel forklift
https://www.thingiverse.com/thing:3189312

Printed 3-wheel with ROPS, paywall
https://cults3d.com/en/3d-model/game...wheel-forklift

Piggyback
https://www.thingiverse.com/thing:4566456

Scissor-Lift aerial platform
https://cults3d.com/en/3d-model/game...imilar-designs

Caterpillar UK 1990s safety
https://youtu.be/RgQM-ZslKrg?feature=shared

Klaus german safety
https://youtu.be/TJYOkZz6Dck?feature=shared

Re: Yale Forklift - NewRay
 

So, um, sometimes a guy gets sick the week of an RC event and just ends up with a bunch of downtime feeling awful.
Get Down with the sickness, wanting something to Lift my mood and Raise spirits...

https://imgur.com/FTjvR9Jh.jpg

Yes, clearly i needed a HappyPeople RC 1/16 scale "Jungheinrich EFG 216K Lithium-Ion" forklift.

https://imgur.com/g5UaKBfh.jpg

This is a compact and highly manuverable machine with 3 wheels. Rear wheel does drive & steering, the 2 near the rack are along for the ride. The box claims lifting 90 grams. Radio is a junk 3-channel binary control thing. Lift rack is single-stage and is absolutely unsuitable for anywhere with overhead obstructions. It can turn within its length. It has many places to install blinky, and blinding lights!

https://imgur.com/SR7HYhUh.jpg

Looks like this continuing partnership between Lao-Che Airfreight and UPS has brought in some additional equipment. Might need to think about finally making a warehouse with a couple docks soon.

"Ferngesteuerter gabelstapler" is more fun to say than "Radiocontrolled Forklift"

Re: Yale Forklift - NewRay
 

I've got one of those little Forklifts, pretty decent Toy grade RC and great at keeping kids amused for an hour or two ��
Would be interesting to see someone hobby grade then though!

Re: Yale Forklift - NewRay
 

Zabco did a pretty in-depth conversion of the Bruder UPS forklift a couple of years ago.

Here's the link if you didn't see it:
http://rctruckandconstruction.com/sh...ight=FORK+LIFT

Re: Yale Forklift - NewRay
 

Nrs91, cool which model do you have? It's not just kids, these also keep childish adults amused. We came here to play with toy trucks...

Dd, yeah i'm still amazed he managed to cram everything in that Piggyback fork!