Re: IH5070 Paystar 6X6 70+ ton rotator
 

thanks , jeff

I'm going to try I'm not going to rotate it 360 . I'm not 1 to swing over cabs :eek:

Re: IH5070 Paystar 6X6 70+ ton rotator
 

That's an awesome looking truck / rotator. Starting to look like the infamous "Kong" rotator out of New Jersey.

Richard

Re: IH5070 Paystar 6X6 70+ ton rotator
 

thanks vanisle

spent some time on my stuff yesterday. I put new esc + 2.4 ghz radio in my 5900 , got that bug fixed . then totally move drive componants on this 1 . The darn coupling kept loosening between the 2 trans. so I moved the axial trans. behind the cab and used 1 of those dog bone shafts that seem to accumulate with no use . Results are great :D , must have had just a slight miss alignment :( . Finished the body work and pushed the paint , a little orange peel but the sun is working that out now ;) .

http://i830.photobucket.com/albums/z...r/PIC_0536.jpg

http://i830.photobucket.com/albums/z...r/PIC_0537.jpg

http://i830.photobucket.com/albums/z...r/PIC_0538.jpg

thats it for a little bit till I get some other stuff caught up .

IHSteve

Re: IH5070 Paystar 6X6 70+ ton rotator
 

In case you haven't seen it, here is a build thread for "Kong."

http://tow411.yuku.com/topic/43285/t...port-unit.html

There are plenty of pictures of a B&B 80 ton rotator on a Paystar similar to yours, although I think the photo you showed was a Miller rotator.

Re: IH5070 Paystar 6X6 70+ ton rotator
 

yes I've seen that 1 but didn't know they put the 80 ton on it :eek: yes the 1 I'm showing is a miller . I think I might put that style bumper on it .

IHSteve

Re: IH5070 Paystar 6X6 70+ ton rotator
 

They actually consider it a 100 ton rotator and Highpoint, now Avella, even put a 100 ton rating plate on it (which caused some debate on Tow411). B&B was going through the process to have it re-rated to be a 100 ton rotator but I don't think that was ever done. The limitations appear to be in the carrier and not the rotator itself. I think a B&B 80 ton, Miller 1075, Jerr Dan 70/85 and NRC Heavy Incident Manager will all get the job done.

Personally, I like the look of the Miller, especially on a twin steer chassis. They all make twin steer models but I prefer the look of a 72 inch front axle spread which Miller uses, whereas Jerr Dan and NRC both have the second axle behind the cab. B&B doesn't have a standard twin steer configuration but I think they recently doing one on a stock T800 twin steer chassis.

Regardless, your Paystar is going to be awesome!

Re: IH5070 Paystar 6X6 70+ ton rotator
 

I'm actually pondering a twin steer , and with the axial trans slid back I got the space for it . I can even slide it back more . could be a reality with the time it is taking me to build it .

IHSteve

Re: IH5070 Paystar 6X6 70+ ton rotator
 

Oh, you should definitely do a twin steer. You can find lots of photos on Tow411 (as you probably know already). There are also some on wreckerdriver. Here is a nice C500 twinsteer with a Miller on it.

http://www.wreckerdriver.net/photos/...eer001&cat=584

Sorry, I don't know how to post photos directly yet.

Re: IH5070 Paystar 6X6 70+ ton rotator
 

Good job as always Steve,nice color!

Re: IH5070 Paystar 6X6 70+ ton rotator
 

I think I will :D Ohhh more tlt super singles :eek: The thing with Kong is it has at least a 24000# front and 65000# rear . Those Paystar's are built to take just about anything ,much like a kw c500 .it's rare to find 1 with a light spec unless you get a soft nose . A local towing co had a c500 with just the crane on it , what a beast ,shame they lost it in a shop fire :( .

thanks Troy

IHSteve

Re: IH5070 Paystar 6X6 70+ ton rotator
 

Steve that is going to be a beast. I can't wait to see her finished and doing a rotated recovery. With the wrecker I have now and the one that is on the way I'm tempted to buy one of those cheap chinese ones and beat it up a little for the tow's to have something on the hook.

Re: IH5070 Paystar 6X6 70+ ton rotator
 

Re: IH5070 Paystar 6X6 70+ ton rotator
 

it already is :D yea more wrecks the better :p

I will but I'm already have a shortage on axles :eek: HMMM how many more can I get on the bench :p

Re: IH5070 Paystar 6X6 70+ ton rotator
 

Steve are you ever going to finish this thing?I was wondering if you lost base with it.
Greg

Re: IH5070 Paystar 6X6 70+ ton rotator
 

Greg , yes , I have to order a bunch of things and some tooling to make some of the parts . also have to free up the machinery :eek:

IHSteve

Re: IH5070 Paystar 6X6 70+ ton rotator
 

now does this look like I lost interest :p these dang lil elves just come to work when they feel like it :mad: Any way , now I can see what room I have to work with , not much :eek:

http://i830.photobucket.com/albums/z...r/PIC_0675.jpg

http://i830.photobucket.com/albums/z...r/PIC_0673.jpg

thats it till next month when the elves get of Christmas hours :p

IHSteve

Re: IH5070 Paystar 6X6 70+ ton rotator
 

Looks good Steve ! you can rush perfection.

Brian

Re: IH5070 Paystar 6X6 70+ ton rotator
 

Looking good Steve

Re: IH5070 Paystar 6X6 70+ ton rotator
 

This thing looks mean!

Re: IH5070 Paystar 6X6 70+ ton rotator
 

The truck is looking good Steve.

Travis

Re: IH5070 Paystar 6X6 70+ ton rotator
 

looking good

Re: IH5070 Paystar 6X6 70+ ton rotator
 

thanks all , He's back in his box for a lil till I gather more components and time

Re: IH5070 Paystar 6X6 70+ ton rotator
 

Steve - that rear body really starts to make her take some form ...... "He's" lookin really strong

Re: IH5070 Paystar 6X6 70+ ton rotator
 

Thanks Chris , Is godzilla a he or a she :confused: ( that's what I'm thinking for a name :rolleyes: ) It's gona take some time till I get all the components made and bought as other things take priority :( . this I think will be 1 of the most enjoyable trucks I built :D . It goes everywhere

Re: IH5070 Paystar 6X6 70+ ton rotator
 

Steve,
R u kidding me my popcorn is going to get stale and cold now.WHY STEVE WHY?
I was enjoying this build **** it!
Greg

Re: IH5070 Paystar 6X6 70+ ton rotator
 

ask the econ Greg :mad: puts a big damper on things :(

Re: IH5070 Paystar 6X6 now a log truck
 

I got tired of this sittin and the rotator was just not looking good on this chassis :( and lost interest in it for a bit :( so the rotator is on the shelf for the next IH chassis :D . So now it's going to be a self loading log truck with a pup . I got the boom base made up tonight and mounted to the frame . I'll get pics up as I get more done :o tomorrow I'm back out of the shop for another week :(:(:(

Re: IH5070 Paystar 6X6 now a log truck
 

Godzilla is a girl;)And your rig is awsome!!!

Big John

Re: IH5070 Paystar 6X6 now a log truck
 

This is looking good, nice job steve.

Re: IH5070 Paystar 6X6 now a log truck
 

Just a peek ;)

http://i830.photobucket.com/albums/z...r/PIC_1135.jpg

http://i830.photobucket.com/albums/z...r/PIC_1136.jpg

Re: IH5070 Paystar 6X6 now a log truck
 

great work! wow!

Re: IH5070 Paystar 6X6 now a log truck
 

I did a little when I got home not much :(

http://i830.photobucket.com/albums/z...r/PIC_1140.jpg

I'm going to try the boom with out the cnc control :eek:

http://i830.photobucket.com/albums/z...r/PIC_1139.jpg

Re: IH5070 Paystar 6X6 now a log truck
 

Lookin good Steve.

Re: IH5070 Paystar 6X6 now a log truck
 

thanks Ralphy :) that lil puppy was the fastest build I did :p and fun as heck :p few little details to finish and polish the body and she's ready to work:D

thanks Mike :)


some evening work :)

1st pic :) boy I love big iron :D:D

http://i830.photobucket.com/albums/z...r/PIC_1142.jpg

boom segments

http://i830.photobucket.com/albums/z...r/PIC_1144.jpg

http://i830.photobucket.com/albums/z...r/PIC_1147.jpg

http://i830.photobucket.com/albums/z...r/PIC_1146.jpg

all loaded up :p

http://i830.photobucket.com/albums/z...r/PIC_1148.jpg

BTW all jog milling and cranking the knee up for depth :( I can't wait till that fridgin servo drive comes :eek:

Re: IH5070 Paystar 6X6 now a log truck
 

lookin good steve...

Re: IH5070 Paystar 6X6 now a log truck
 

nice work steve

Re: IH5070 Paystar 6X6 now a log truck
 

Good to hear your finally makin' chips with that beast!! Boom lookin' good! Joe

Re: IH5070 Paystar 6X6 now a log truck
 

thanks guys ;)

just a lil more :D my motors came today and I kinda lost track of the time :eek: now I'm to high :( by 1.5 ' ( 1.25" in scale ) I may keep it though :confused:

http://i830.photobucket.com/albums/z...r/PIC_1156.jpg

http://i830.photobucket.com/albums/z...r/PIC_1153.jpg

http://i830.photobucket.com/albums/z...r/PIC_1154.jpg

here's what it was made from

http://i830.photobucket.com/albums/z...r/PIC_1155.jpg

thanks for looking

Re: IH5070 Paystar 6X6 now a log truck
 

Very impressive, way to go:D:)

Big John

Re: IH5070 Paystar 6X6 now a log truck
 

I have a feeling the next 10 parts you make will need something cut on the big mill... :p :D

Seriously...nice work Steve. Hey, you're milling big chunks 'o metal...I've been milling sheets of Styrene all night. LOL. I'll put something up later.

Joe