|
Re: china kat
So what scale is the kat anyways? I think the site said 1/12? i was wonderimg cause i am wanting to biy a set of tracks but don't know whitch to buy. i belive the kat tracks are 50mm wide? Like an inch or so. that would be a nice fit on my ex. or i go buy magom tracks. they look nice. what's your opps?inion
|
Re: china kat
while waiting on some upgrade parts to arrive from PA!!!
http://i1335.photobucket.com/albums/...pseer7z4el.jpg swapping out the kat cylinders for the rc4wd cylinders and larger hydro tank the pinion gear loosened up |
Re: china kat
still waiting on parts
http://i1335.photobucket.com/albums/...psv027n2ue.jpg over sized hydro tank works well enough for testing LOL!! has to be ready for the Canadian invasion |
Re: china kat
|
Re: china kat
Parts found:) lol!! With some real kitty kat krap!! Lol!! Will make time for visit to post office Monday.
Long story short,,,,, Parts placed in usps bubble wrap bag, Bag placed on golf cart waiting for trip to post office, Wife cleaned, Wife placed usps bag with parts in trash bag along with cat litter, Trash bag placed in truck, Truck went to dumpster, Trash went into dumpster, Rw looks for parts, can't find parts, asks wife where bag'o'parts got to, Wife responds " I didn't touch them" Some colorful conversations later, Rw goes dumpster diving and finds parts!! Luckily we don't get dumpster taken till Monday, and I found them!!!! |
Re: china kat
Forgot to add
PRICELESS!!! |
Re: china kat
Also forgot to add,,,
Can't find wife, anyone know where a good starting point to look would be??? |
Re: china kat
look in said dumpster
|
Re: china kat
Quote:
|
Re: china kat
http://i1335.photobucket.com/albums/...ps54kgkicg.jpg
http://i1335.photobucket.com/albums/...psb8sq5jzk.jpg pump needs more power for dirt digging!! i think she will be a good sand ground rubber digger still looks real nice parked for transport ( what i'm best at) http://i1335.photobucket.com/albums/...ps0rrdxg3d.jpg |
Re: china kat
|
Re: china kat
here joe a better pic of the insides for ya!!
http://i1335.photobucket.com/albums/...psbitw0pia.jpg what a pos the old pump is compared to the new one http://i1335.photobucket.com/albums/...psr0qka6sl.jpg one sexy pump LOL!! waiting on the new ESC http://i1335.photobucket.com/albums/...ps7fzfckvr.jpg |
Re: china kat
I have an older magom pump. But am seriously thinking that this is the one for me also!
|
Re: china kat
You wanna sell the old pump Mark?
|
Re: china kat
Quote:
|
Re: china kat
good thing the kat is the size of the wedico 345
|
Re: china kat
I have ordered custom rams and i have the rc4wd valve block and my ex is not a small one for sure! I went for 1\14 but winged it on most. But it is proportional and not to out of scale. Its my first and i have changed a lot threw the past year. But i love building it! Im not sure i will be operating it as much as i will be tinkering and building new parts for it.
|
Re: china kat
My old pump is also the first one magom put a prv into. Which was the last one before the one you have. Im not sure how long it will last either. I havent even ran it and i pulled it apart to see if i can seperate the tank and the pump gear was eating into the housing i imagine it was from magom testing it
|
Re: china kat
Looking much better Mark ;)
Find a bus bar yet? |
Re: china kat
Not yet. Pulling my hair out with the esc.
|
Re: china kat
Do you see a # stamped on that Jung pump? ...hopefully it's not located behind the tank... I wonder if it's 4001, which is Jung's smallest pump @0,15ml/rev.
|
Re: china kat
It's supposed to be an HR7 I think which is bigger than what I have in my Volvo(HR5).
|
Re: china kat
after 3 days a few you tube videos i got the esc to work
https://youtu.be/VyH0N63AJbc |
Re: china kat
|
Re: china kat
Beautiful rigs :)
|
Re: china kat
messing around with the kat and lowboy
https://youtu.be/TyMXsvFYCIQ |
Re: china kat
Did you get the pump all setup and running?
|
Re: china kat
testing and tuning is going good
operator sucks. im better at hauling them!! |
Re: china kat
Fleet looks sweet! Nice lowboy :D
|
Re: china kat
Quote:
|
Re: china kat
|
Re: china kat
Where did that come from? You been working on that for a little bit hu? I've been trapped in a family-in law holiday vortex,,, soon to be spun out and back to my single dwelling garage :)
|
Re: china kat
wacked it out in two hrs after coopering my fingers trying to open the cat up LOL
|
Re: china kat
Track seems to make more noise going forward than reverse, is it the gear motor or the track hitting the fender?
|
Re: china kat
hey joe
the drive gear is just snug on the drive hub for now its a work in progress. trying to kill the urge to buy the rc4wd dozer for now LOL!! |
Re: china kat
messing with the cat. only one firgelli (i love those things)
https://youtu.be/dbcoET9O5Z4?t=15 |
Re: china kat
Just in time to use it for pushing presents out from under the tree to your respective family members. :D
|
Re: china kat
i was pushing the balls my dog knocked off the tree :lol:
|
Re: china kat
http://i1335.photobucket.com/albums/...pswy5cdqxj.jpg
http://i1335.photobucket.com/albums/...psslvffn2e.jpg http://i1335.photobucket.com/albums/...psidk6gurl.jpg http://i1335.photobucket.com/albums/...psv3j5qo4k.jpg http://i1335.photobucket.com/albums/...psvrletbng.jpg needs some lead down bellow if i want to push wet sand. But should be good for rubber |
| All times are GMT -4. The time now is 08:56 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.