Re: S&M Trucking open for bizz nizz !!!
 

You have an upper edge Plow Jockey...You've seen the trailer...:( :)

Re: S&M Trucking open for bizz nizz !!!
 

:D:D:D:D LOL!!

Re: S&M Trucking open for bizz nizz !!!
 

Looks great guys! I was wondering how this was coming along yesterday when I was working on my truck :) I need to get some side marker lights too, I think that is a really nice touch

Re: S&M Trucking open for bizz nizz !!!
 

Lol:D. Thanks Fred. I wish I had a video camera running when I told Sue that you saw her trailer! :D. .... Priceless, it was definitely a Kodak moment. Lol ;)

Mario

Re: S&M Trucking open for bizz nizz !!!
 

Thanks JD. :cool:
If there was one thing I would do different with the marker lights, I should have used 1 mm LEDs and solder in series one at a time. The pre wired lights are great to work with but sacrifice room due to the resistor and the 1.8mm size that I used.

Mario

Re: S&M Trucking open for bizz nizz !!!
 

Me to the trailer is a work of art, I think you will be very happy.:D

Travis

Re: S&M Trucking open for bizz nizz !!!
 

That's to funny!! I figured it would get her twisted up a bit!!!
Without a doubt that trailer sweet. When I saw it, I told Izzy I had to have one. It is definitely worth the wait. Lol.

Re: S&M Trucking open for bizz nizz !!!
 

Mario, the lights are looking great. You did a fine job. I had asked about the voltage you intended to run your LEDs on because I noticed you had a resistor for each one, rather then a couple in series, with one resistor. I just assumed your voltage source was pretty low. Anything less then about 6 volts, and you kind of get stuck running the LEDs in parallel. Even on 7.2 volts, you really can't do more then 2 in series.

Re: S&M Trucking open for bizz nizz !!!
 

Nice job Mario, can't wait to see it hitched up to this awesome trailer I'm hearing about.

Re: S&M Trucking open for bizz nizz !!!
 

Mario:

Did you find any shrink? You might want to check to see if you have an 'Active Components' outlet in town, they have electronics stuff in-store. The other option is the paint-on electrical tape. Would have shrink beat by a mile. OH... in a pinch, dollar store nail varnish!

If you canna find any, and ~really want shrink, I've got an Active Components down the street, I'll check what the smallest diameter they have, and I can always mail it to ye!

Let me know. I'm going to need some anyway, for when I rig my Tamiya flatbed, Goldie lowboy, and the King Hauler/Globeliner cabs. Plus I owe the group a few favors by now...

Wish someone would post a DIY for the SMD-LED beacon lights. I'd love to see how they sequence 'em - 555 timing chip, or what? I ask as I made a 'scanner' setup years back when i was going to make a KITT replica in 1/8 scale, one that could talk back to kids by using a voice-actuated walkie-talkie setup. Still got the first one, and probably most of a second. Dunno what I did with the build/wiring diagrams though.

WhiteWolf

Re: S&M Trucking open for bizz nizz !!!
 

Thanks everyone for the comments. :)

Hey Whitewolf, I did find some shrink tubing at a local electronics store but thanks for the great suggestions....nail polish? I never would've thought but I believe you, that would work :cool:

So I made a quick, random drive around with the truck and lowboy..... You know you live in a small house when..... You ain't got the room to turn your rig in less than a 4 point turn!:eek::)


Enjoy.:)

http://youtu.be/syL3Wi4XMh0


Mario

Re: S&M Trucking open for bizz nizz !!!
 

The lowboy look's good hooked up to "BLACK PASSION". You and Susan should be proud, beautiful truck.:cool::);):D

Big John

Re: S&M Trucking open for bizz nizz !!!
 

Great video Mario! The lowboy and truck are a very good combination together! I love watching the rear suspension soak up the uneven carpet to floor transition.

Now, do something about that VCR blinking 12:00 in the video! Ha ha. :D

Re: S&M Trucking open for bizz nizz !!!
 

Thanks Big John. Mario gets all the credit. I just picked what I wanted and he is seeing to the details. LOL .I have to agree it's beautiful.

Espeefan from what I hear, my trailer is going to look even better hooked up than any trailer we currently have. Didn't look close enough in the video but the receiver should've been blinking "muting"... LOL

The build is coming to an end which will mean, playtime. Hopefully Mother Nature will allow.

Re: S&M Trucking open for bizz nizz !!!
 

Hey everyone. Need to pic your brains...... You may notice the cab marker lights are brighter than the sleeper lights ( some is camera glare but they are bright) compared to the sleeper which are more of a "soft" look led. I would hate to have to replace and redo the lights and trying to come up with options on how to possibly mellow the lights out.??

My first thought is candle wax perhaps? I figured if it doesn't work, at least it's not permanent and can be cleaned out? Maybe a dab of paint? What color to use?
The lights are recessed quite a bit on the plates and not a flush or protruding mount. There is depth , maybe 3-4mm.

Any help is always appreciated and thanks everyone for all your comments and support through this build, it's been a great experience :):cool:

Mario

Re: S&M Trucking open for bizz nizz !!!
 

:o:o.... Thanks Chris. I feel like an idiot not considering adding resistors to the feed wires:eek: can you tell I'm sick of wiring and would rather resort to candle wax! ...lol :eek:

One feed wire , one resistor..... I can do that! Very easy to test various resistors and get the proper lighting:cool:

Thanks Chris for showing me the light! :p:D.


Mario

Re: S&M Trucking open for bizz nizz !!!
 

This is one HAPPY Mama! I got to see pictures of my trailer tonight. It's is sweet as it sits and will be even sweeter once I have worked my magic on it. Izzy ROCKS!!!!!!!!!

:):D:D;):D

Re: S&M Trucking open for bizz nizz !!!
 

hey guys looking real nice and sweeeet:D

Re: S&M Trucking open for bizz nizz !!!
 

thanks everyone!

small update on Black passion, mostly details but that's whats left!:D last thing is the company logo:)

I told susan we needed air horns somewhere! so I cut and modified the original horns to fit here....

http://i1174.photobucket.com/albums/...sf134e56c.jpeg

also got the handles mounted on the back of sleeper...

http://i1174.photobucket.com/albums/...s9683f54b.jpeg

http://i1174.photobucket.com/albums/...sf225ffd5.jpeg

and yes, the fenders are on!:D

http://i1174.photobucket.com/albums/...s6c2ce16e.jpeg

http://i1174.photobucket.com/albums/...s8503fad3.jpeg

thanks for looking and any comments and suggestions appreciated:)

mario

Re: S&M Trucking open for bizz nizz !!!
 

I love the train horns and the rear fenders, really set's off the whole truck.:D:D:D My hat's off to you and Susan, great job.;):):D:cool:

Big John

Re: S&M Trucking open for bizz nizz !!!
 

Really, really nice job you two. Black, clean lines and chrome, BOOM!

Ben

Re: S&M Trucking open for bizz nizz !!!
 

Mario, I love the air horns mounted by the step! That's something I wanted to try myself as well. Perfect for a cab with a ton of cab lights on it. You're the first to do this.

Susan, I assumed the time was what was flashing in the video! Muting, eh? Okay, we'll go with that, since I couldn't quite make it out in the video. :D So, where are the trailer photos! Half the forum knows what you've got already. Let the rest of us know too. :p

Re: S&M Trucking open for bizz nizz !!!
 

Patience grasshopper.....

Re: S&M Trucking open for bizz nizz !!!
 

Mario is all about clean lines, and quiet when he is videoing(LOL)- I usually leave the house, he's not afraid to try something new/never done

Just got word yesterday that the trailer is done. My Dad is going to pick it up when he is in Indiana the first week of April. So we all have to be patient a little while longer. :)

You tell him Izzy! :p Patience! Once we get it the lights have to be installed, not as many as Smiley so it won't too much work, and a couple other things.

Re: S&M Trucking open for bizz nizz !!!
 

Thanks Big John :)

Thanks Ben. I like the Boom! :)

Re: S&M Trucking open for bizz nizz !!!
 

Mama has asked that I share her Happiness..... If there are things you don't like - hold your thoughts - I'll start a thread over in my area - I am planning to have a version of this trailer as a standard..... So constructive comments go there...... But general comments about MAmas dream machine can go here....


http://i262.photobucket.com/albums/i...psf5cda819.jpg

http://i262.photobucket.com/albums/i...psd5f8cede.jpg

http://i262.photobucket.com/albums/i...ps3b272851.jpg

http://i262.photobucket.com/albums/i...psfd0a489d.jpg

http://i262.photobucket.com/albums/i...ps58c2dc6e.jpg

http://i262.photobucket.com/albums/i...ps229af84d.jpg

http://i262.photobucket.com/albums/i...ps7bc7bc53.jpg

http://i262.photobucket.com/albums/i...ps1b8f4e33.jpg

http://i262.photobucket.com/albums/i...ps94f5858c.jpg

http://i262.photobucket.com/albums/i...psa1ec9d4c.jpg

http://i262.photobucket.com/albums/i...psb87b95c3.jpg

http://i262.photobucket.com/albums/i...ps6da39ca3.jpg

Re: S&M Trucking open for bizz nizz !!!
 

Beautiful work.

Re: S&M Trucking open for bizz nizz !!!
 

I LOVE IT!!!!!!!!!

Re: S&M Trucking open for bizz nizz !!!
 

Mama - Should have enough grunt for anything you put at it - I would request you stick with light dirt (loamy type - high compost - loose ) or the crushed rubber . It's a big box to lift.

If it goes up too slow - let me know and I'll swap for a different motor set--up. or talk Mario into installing a 12V battery for the lift with a voltage reducer for everything else......:)

Re: S&M Trucking open for bizz nizz !!!
 

Nice looking trailer mama sue be sure to get some pics when you get it hooked up to that awesome black pete

Re: S&M Trucking open for bizz nizz !!!
 

Thanks Ben, we can't help but smile when we look at it:D

[QUOTE=Espeefan;82452]Mario, I love the air horns mounted by the step! That's something I wanted to try myself as well. Perfect for a cab with a ton of cab lights on it. You're the first to do this.

Really? I just figured it was the natural choice and had the room so I thought why not.:). Now that I think about it, I guess I haven't seen this on a Rc truck before. Thanks Nathan.:cool:



Thanks Izzy. I'm sure it will work great. I don't plan on loading anything dense with my bruder loader. The lighter the material, the longer everything will last ;)

Re: S&M Trucking open for bizz nizz !!!
 

WOW, I love that trailer! A must have for me. Just need to find the funds. Will look awesome behind the black Pete.

Re: S&M Trucking open for bizz nizz !!!
 

As usual, top notch work Izzy.:eek::D:);):cool: Susan will love this, I know I would.;)

Big John

Re: S&M Trucking open for bizz nizz !!!
 

Nice trailer! I can't wait to see that all finished up. Izzy's getting into the end dumps now? Excellent!

Re: S&M Trucking open for bizz nizz !!!
 

I can't wait till its all done too:). First I have to wire it and then place it in Susan's hands for the polishing phase :) we need to have it ready for the Clifford show on July 1st.:eek:;):cool:

Mario

Re: S&M Trucking open for bizz nizz !!!
 

wow Mario that truck turned out awesome and the trailer is sweet. cant wait to see it all done. and watch out there is a new company coming gonna steal the business I herd. something like DD TRUCKING!! LOL

Re: S&M Trucking open for bizz nizz !!!
 

That trailer is sweet for sure!!! Can't wait to see it buffed up and hooked to that great looking Pete!!

Re: S&M Trucking open for bizz nizz !!!
 

thanks for the thumbs up :) ;)

Hey, nothing wrong with a little competition. That's what keeps the industry strong:rolleyes::D

how about....Double D trucking? everyone likes double D :o:eek::D..... what else did you expect from a guy who names his company S&M ? lol.


Thanks Fred. oh , and by the way....I think Sue has gotten over your sneak peek now. lol ;)

mario

Re: S&M Trucking open for bizz nizz !!!
 

Mama's got her trailer and she loves it! Thank you Mario for the gift, and Izzy for building it.
http://i1048.photobucket.com/albums/...n/IMG_0641.jpg
http://i1048.photobucket.com/albums/...n/IMG_0640.jpg
http://i1048.photobucket.com/albums/...n/IMG_0642.jpg

Now the fun begins. Wire up the lights, attach the legs, and polish it up

Re: S&M Trucking open for bizz nizz !!!
 

Looks good :-). But us might want to polish it up first before ya wire it and everything so nothing won't be in the way :D lol