Re: My Stretched globeliner
 

Looks great. Very nice truck Sir. All the little pieces add up for sure.

Re: My Stretched globeliner
 

Thats a nice touch with the air cleaners and stack rack.Good job.

Re: My Stretched globeliner
 

Everytime I come back here the truck keeps getting better and better! Keep at it.

Re: My Stretched globeliner
 

I did before but I still need to find a way to turn the mfu in and of and be able to adjust the volume.. That's the next goal.

Thank you! Yes they do add up in many ways and there's still more to come.. :)

Thanks!

Thank you! That's my goal still quite a ways from done but its getting there.

Re: My Stretched globeliner (new pics 6-20)
 

the rack looks great on the truck :D

Re: My Stretched globeliner
 

Re: My Stretched globeliner
 

Ok cab is pretty much closed for good now well at least i dont need to access it anymore.. I relocated the battery again to the frame rails and moved the switches for the MFU. My speaker idea didnt pan out as i kept blowing speakers so that is a little dissapointing, so i resoldered the original speaker back in. I also started the light box to hide the rack mount.

used the face for a template on the floor
http://i19.photobucket.com/albums/b1...624_154329.jpg

http://i19.photobucket.com/albums/b1...624_154507.jpg

http://i19.photobucket.com/albums/b1...624_170741.jpg

http://i19.photobucket.com/albums/b1...624_170745.jpg

I can access all controls of the mfu and its completely hidden.
http://i19.photobucket.com/albums/b1...624_170753.jpg

Heres what i have come up with so far as i was explaining before

http://i19.photobucket.com/albums/b1...625_003921.jpg
http://i19.photobucket.com/albums/b1...625_010056.jpg

I still need to try to hinge it and add lights to it but it will deff hide the mount the way i thought it would

Thanks for looking!!

Re: My Stretched globeliner
 

looks good, a few red lights back there would set it off

Re: My Stretched globeliner
 

you mean like this?:confused: :D

http://i19.photobucket.com/albums/b1...625_142723.jpg
http://i19.photobucket.com/albums/b1...625_142824.jpg
http://i19.photobucket.com/albums/b1...625_142848.jpg
http://i19.photobucket.com/albums/b1...625_172726.jpg
http://i19.photobucket.com/albums/b1...625_172902.jpg

The light bar prob wont be painted for indy as the truck is not staying this color so the less new stuff i paint the less that needs to be stripped before the new colors go on. the light bar is not fully mounted yet and just taped on for now i need to get 4 new red LEDs thast match so i can rewire it :eek:
Thanks for looking

Re: My Stretched globeliner
 

Aaron, i like the idea of hiding the control panel. Functional, yet clean looking. And I like the box w/ the led's. Great job.:D:D:D

Big John

Re: My Stretched globeliner
 

Thanks Big john! i like it cause i can just reach under the drivers side of the cab and control everything! I have the lights in the box ran off the mfu just soldered 2 more red leds to the brake lights in a series i still may throw in a resistor if needed in the future as the rear bumper is going to have 5 more lights in it...

Re: My Stretched globeliner
 

well all i can say is "Holy smokes!" looks great. if you were to put a drome box on and paint it UVL colors, i would swaer it was my uncle jims old rig.

Re: My Stretched globeliner
 

yup thats what i meant about the lights and they really do hide the mount really well

Re: My Stretched globeliner
 

Thanks guys!! Got more parts headed my way soon!! :D:D At this rate she may have a new temp color by indy!! :eek:

Re: My Stretched globeliner
 

Great job Aaron! Its been awhile since I looked at your thread. The breather assembly is pretty sweet. Good Idea for the hidden MFU controller too!

Re: My Stretched globeliner
 

Thanks Brian!! I cant wait to get all the other extras, lights and new paint on it!! its getting there slowly but surely

Re: My Stretched globeliner
 

Got my 6 tooth pinion gear from RC4WD made a spacer and man it helped slow my truck down quite a bit!!! Thanks for the link Paul!!

Re: My Stretched globeliner
 

lookin real good! Your advatar shows your driver in the rubarb. better tell him to get some sleep!!!lol

Re: My Stretched globeliner
 

Just got my 55T motor and 9tooth pinion in mine big difference over stock. Trucks looking good

Re: My Stretched globeliner
 

This week has been great so far with parts coming in :D:D Got my new bumper and bezels in! Russ and Lynn big Thank you!!! Awesome work guys!!

http://i19.photobucket.com/albums/b1...709_200947.jpg
http://i19.photobucket.com/albums/b1...709_201008.jpg
http://i19.photobucket.com/albums/b1...709_201050.jpg
http://i19.photobucket.com/albums/b1...709_201108.jpg

I love it!!! Now i just gotta light it up. Now im wondering if i could just cut the old fog lights off the leads and series in the 8 2v LEDs i need? i added 2 to the brake lights with no ill effect.. maybe through in a 56ohm resister or 2? My lowboy is 5 sets of 4 led/1 56ohm resistors in a series... Still need to order the new pipes, visor, and wait for one more custom part and it should be pretty much done minus new paint scheme. Anyways thanks for looking

THANKS AGAIN RUSS AND LYNN!!