Custom fenders
 

Custom plastic resin full fenders...$40..mounts needed..

http://i883.photobucket.com/albums/a...0307012142.jpg

http://i883.photobucket.com/albums/a...307012142a.jpg

http://i883.photobucket.com/albums/a...307012141a.jpg

http://i883.photobucket.com/albums/a...0307012141.jpg

http://i883.photobucket.com/albums/a...0307012143.jpg




Also Custom Double hump fenders.$55 a set..mounts needed..

http://i883.photobucket.com/albums/a...219110155a.jpg

http://i883.photobucket.com/albums/a...304012054a.jpg

http://i883.photobucket.com/albums/a...0304012055.jpg

And soon to come single hump fenders for your speadaxle trailers and triaxle tractors...:cool:

Re: Custom fenders
 

I picked up a set of the double hump fenders and they are very well made. Also a great guy to deal with. Keep up the great work.

--Dan

Re: Custom fenders
 

Hey all...Im messing around with a different style of double hump...this a is just a rough copy..but if any interest i clean up to make the master mold..i will be also doing these in a single for trailers too..:confused::confused::o

http://i883.photobucket.com/albums/a...0108021608.jpg

http://i883.photobucket.com/albums/a...108021617a.jpg

http://i883.photobucket.com/albums/a...0108021616.jpg

http://i883.photobucket.com/albums/a...0108021610.jpg

http://i883.photobucket.com/albums/a...0108021625.jpg

thanks for looking:D:D:D

Re: Custom fenders
 

WOW John, those are sweet. You've got me thinking of a future project:D:rolleyes::cool::);)

Big John

Re: Custom fenders
 

Thank's big John...Have some more work to do to them...going to make the outside go straight down..just a nicer look..like this:D:D:D
http://i883.photobucket.com/albums/a...pete/03262.jpg

Re: Custom fenders
 

I think those would look hot on my 362 Pete

Very Nice John

Alfy

Re: Custom fenders
 

I have to agree John, that's just look's sexy...nice curves.:rolleyes:;):cool:

Big John

Re: Custom fenders
 

Ok..Now they go straight down..now time for the body work..:eek::eek::eek::D:D

http://i883.photobucket.com/albums/a...0109021913.jpg

http://i883.photobucket.com/albums/a...0109021914.jpg

http://i883.photobucket.com/albums/a...0109021916.jpg

:D:D:eek:

Re: Custom fenders
 

Send me a pair!!! I can make mounts for them to..

Re: Custom fenders
 

Can these be made for a Wedico Pete!!!!!:):):):)

Re: Custom fenders
 

Ok here they are..:D..there $55 shiping included....Must make your own mounts..everyone mounts them different to there own taste..unless someone wants to make mounting kits...hint...hint..hint...:p:p:p..anyone..:p:p..

http://i883.photobucket.com/albums/a...0129022045.jpg

http://i883.photobucket.com/albums/a...129022045a.jpg

http://i883.photobucket.com/albums/a...0129022046.jpg

Re: Custom fenders
 

Re: Custom fenders
 

I can't really make a "kit" cause they can be mounted at different heights.. But I can make them to order...

Re: Custom fenders
 

how would you make them to order by which tamiya or wedico tractor you have and which suspension you are using on the tractor

Re: Custom fenders
 

They would be made for a Tamiya truck with a standard suspension or a custom suspension as long as the ((wheel base) typo should be wheel spacing of the rear axles) stays the same. The fenders are made to fit a standard Tamiya truck.

Travis

Re: Custom fenders
 

ok i have a kinghauler and a globeliner the suspension is stock but the wheelbases on them are longer than the standard box stock trucks are you sure the wheelbase would be an issue i thought the axle spread would be the a problem ..i am talking about someone building the mounts to mount them on the trucks

Re: Custom fenders
 

Hey John this things look awesome, really adds to the wifes rig. Gives it that extra attitude in the back half to match that new meaness the paint job graphics added. Nice work as usual buddy.

Re: Custom fenders
 

I build them so that they fit the way you want them regardless of the make of truck or type of suspension. I get measurements from you, I let you determine how high you want them to sit from the wheels and the ground then build them to fit.

I guess I could make a "Stock" set. If you have a stock Tamiya suspension, stock ride height ect and you want the full length fender as they come from John then no measurements are needed. I could also build a set that has a little extra adjustment to them and someone with basic soldering skills can make them the height they want and just trim the excess.

Re: Custom fenders
 

Wheel base would not be an issue unless you changed the drive wheel spacing, which you can't do if using a stock suspension. However if you were to use the air ride kit that Russ sells then you could change that spread. However if you were to change the drive spread then the fenders would not fit anyway.

Re: Custom fenders
 

I guess that was my bad when I said wheel base I should have said the rear axle spacing and if you changed that it would not mater what brackets you made the fenders would not fit and the fenders are what I was referring to not the brackets. Sorry for the confusion.

Travis

Re: Custom fenders
 

oh ok now i understand i have not changed the spread between the axles i am interested in the full fenders the very first picture but i would need someone to make the mounts for me to mount them' everything on my trucks by way of suspension is stock ...nothing changed

Re: Custom fenders
 

one more thing are they molded in color or do they come white and must be painted by the buyer or do you paint?

Re: Custom fenders
 

the fenders are molded a tan..they have to be painted....i can paint if you need that done too..:D:D

Re: Custom fenders
 

what paint do you use is it special or just regular spray paint will do

Re: Custom fenders
 

Rattle cans do work well...I use automotive paints a base coat, clear coat...it gives the best finishes:D

Re: Custom fenders
 

ok thats cool i can paint myself then to match my trucks....thanks:)

Re: Custom fenders
 

one more question did you ever get a reply back from anyone willing to make mounts for these fenders..if i missed it i'm sorry i'm not that experienced yet to make mounts for the fenders:eek: and i would like to check which trucks i want them on and probably order a set or 2 from you:cool:

Re: Custom fenders
 

I make the mounts for John. When you get the fenders drop me a PM and I will walk you through setting the fenders then getting the measurements I need.

Re: Custom fenders
 

ok that sounds great thank you so much:):)

Re: Custom fenders
 

I NEED A PAIR OF THE DOUBLE HUMPS YOU HAVE HERE THAT ARE BLACK CONTACT ME AT gmcdually@consolidated.net

Re: Custom fenders
 

i need a set of the double humps like you have painted black.

Re: Custom fenders
 

Hey pete66 send him a PM. I think they are having a show this weekend so it mite be Monday before he can get in touch with ya.

Keith

Re: Custom fenders
 

OK THANKS

Re: Custom fenders
 

Did you ever make the singles yet???

Re: Custom fenders
 

Here's the single ones on the lift axle..:D:D

http://i883.photobucket.com/albums/a...304022218a.jpg

Re: Custom fenders
 

Oooohhh those came out nice! how much are they? :)

Re: Custom fenders
 

sent you a pm on the fenders

Re: Custom fenders
 

Do you or can you make quarter fenders?

Re: Custom fenders
 

Hi,I'd like to purchase x2pair of you double hump fenders.how do I go about this please.
Cheers Mick

Re: Custom fenders
 

I'm in for a set of the Fenders. Do you accept Paypal ? If so, what is the Address. Did you make or buy the rear Bumper ? Does it light up ? If so, I want one of those too please. Please let me know about the Paypal and the Bumper please. Hope to Here from you soon.

Thank you very Much,
Robby