Newb from CT.
 

Hello all!!

Just gettin my feet wet with the rig scene, been around R/C most of my life but have always been running circles!(oval racer). Now I have become interested in these real nice trucks!
I have had a very small collection ...... starting .. ;)
A Knight w/alum. around and the MFU.
Tamiya's flat bed w/light kit & legs.
A Globetrotter FH12 stock except bearings
A MAN TGX
A Tamiya 3-axle Reefer trailer

I am, now starting my 1st "custom" build, a R620 Scania stretched to 30" with 3 axle, single steer car hauler deck. Using Freddy for the rails and some other goodies, RC4WD for winch & drive shaft, trying to come up with a suitable lift system for the deck??? And some Knight Hauler tanks/boxes & running boards to fill in all the open space. I picked up a set of the wide fronts and a bunch of other goodies.
Now for most of ya this is no big deal, and you all have prob. seen this build b4? But being the 1st real 1 for me, I figured baby-steps was a good way to start...?
So as soon as the rails R done from Freddy then I will start mocking up all this mess and then maybe even post a pic. or 2 of my maiden build??

I am learning as I go so if any of U wanna interject, PLEASE do!!:D

I would appreciate the help/advise!!


-Mike

Re: Newb from CT.
 

Welcome!!! Cant Wait for the build.

Re: Newb from CT.
 

Hey Mike glad to see ya around. Can't wait to see a few of your collection and also can't wait to see the start of that roll back. Lemme know whenever you get your measurements on what we talked about and I'll be glad to help ya.:D

Re: Newb from CT.
 

Yeah, U bet!!

It will be a few weeks, but I will get there!!:rolleyes:

I was gonna throw a few pics. up but their nothing special....

Re: Newb from CT.
 

Gonna try for the 1st time as well to work some styrene too!!

Should be ...... interesting .....:confused:

I have a "Italian" temper with "sausage" fingers!!:eek::eek:


My wife says.... either its glued fingers or butterfly tape?? :o


This is a WHOLE new road for me!!!!

Re: Newb from CT.
 

Hey Mikey don't be too scared of the styrene. If you need any help give me a hollar and I can see what we can brew up or if I can help ya with any info. :rolleyes:

Re: Newb from CT.
 

Well I sure do appreciate that!!!

And I'm sure a question or 2 will surface. ;)




THANKS-

Re: Newb from CT.
 

Welcome to the forum Mike.

Re: Newb from CT.
 

Thanks DreamWeaver!!

Re: Newb from CT.
 

I guess I need to go nuts for a bit here and rack-up my thread post tally??
I have some parts a guy is lookin for(glorydays24). But I can't post to his thread until my count is up..:eek::eek:


So mikeymagz is goin post-al!!! LOL!;)

Re: Newb from CT.
 

Just noticed.....


rockNmayhem

Happy Birthday!!


prob. late .... but bet'r n not at all.....;)

Re: Newb from CT.
 

Hello welcome to the forum:D

Re: Newb from CT.
 

Thanks!!!

Gotta say... this is a pretty "welcoming" forum!!! Usually takes forever to fit in!!!


And I'm a big greenhorn around the rig-builders here, but I really want to learn and try a few builds myself!

Re: Newb from CT.
 

Welcome aboard Mike. And I got your PM, I sent one right back atcha LOL!!!

Big John:):D:p

Re: Newb from CT.
 

Got it!

----returned one ;)

Re: Newb from CT.
 

To all who read....

It was brought to my att. a few posts back that I might have sounded misleading?
I was wandering through the forum and stumbled onto a person looking for Knight parts. I went to post that I had what he was looking for but could not because of low repy-count. I understand why the moderators set it up that way and respect that. I'm here for the long haul to learn, laugh, have some fun, make some friends, and get involved in a very cool new avanue of R/C! I am not here to just sell items. These parts are extras I had from this build I'm working on right now.
I'm sorry for giving the wrong impression and I meant NO harm by the posting.

Respectfully,
-Mike

Re: Newb from CT.
 

Hey Mike you still made it in time, I even still got an hour to call my birthday lol. :D Anyways thanks for the birthday wish and I hope to many ppl didn't take you wrong. You're a pretty good stand up guy it seems like I just kinda read it as a mistake on words as well. All is good on this end and still can't wait to see your projects come along.

Re: Newb from CT.
 

True....

I never saw it that way until it was brought up.

MY fault......:o :o :o
(feelin pretty crappy about it....)

... I have all the necessary parts packaged up now and their going out to Freddy on Mon. He is going to make my rails and correct my faulty 3rd drive axle and hopefully I can get him to build a few goodies too!!:D There is some things that just can't be taught right now.... when Freddy is done and I get it back then I will re-mock everything and get you your dimensions you need for the lift system. Thanks a lot and I really appreciate everything!


Mike

Re: Newb from CT.
 

No problem Mike just lemme know and I'll get on it for ya again.

Re: Newb from CT.
 

very good, thanks!

Good night and Happy Easter to everyone!!!!


Gotta go hide eggs n stuff with the wife or I'm going to have 4 angry kids in the AM!!:mad::mad::mad::mad:

Re: Newb from CT.
 

Guy's, got a question for ya:

During my wait for parts I have been looking for a paint scheme for the rig. Wile searching I came across this beauty!

http://www.classytrucks.org/Scania.2...L.580.002.html


My question is has anyone seen a roof top like this and the light rack? That is real cool! Is it availabe/manufactuered? Or would this need to be a scratch build?(out of my realm!!)
I don't even know what it is called so I can't google it??

Thank you for any help...


-Mike

Re: Newb from CT.
 

This is not part of anything I was thinking of doing, but I thought it was super cool and wanted to share it with you all. Found it while searching paint schemes/colors.

http://i261.photobucket.com/albums/i...aniacustom.jpg




Honestly was looking for something different, but I REALLY like the Black Amber Special Edition I found... ???????? ..Huh, what to do....?

http://i261.photobucket.com/albums/i...aniapaint3.jpg

I know it is super easy but the color "grabs" me....

Re: Newb from CT.
 

Mike here is the roof. http://www.verkerk-modelbouw.nl/inde...n/Page1237.htm

As for the lights, I am sure this place has them but you will need to look for them (by checking every link if you don't read German) http://www.fechtner-modellbau.de/shop/

Re: Newb from CT.
 

THANKS Dreamweaver!!

I appreciate the links!!