Scania R620 Stretched ....first-pitch
 

Well here is a few pic.s of my 1st custom build in progress:

(I know it is a pretty "simple" build, for most of U all....) ;)

For me it means working with Styrene for the first time, custom made parts, & A BUNCH of research with a tangled mess of 50-questions!! LOL!!




Here goes:

1st mock-up minus the CORRECT rails(Freddy's cutting them now)

http://i261.photobucket.com/albums/i...s/IMG_1989.jpg

http://i261.photobucket.com/albums/i...s/IMG_2059.jpg


My rendition of a headache rack:

http://i261.photobucket.com/albums/i...s/IMG_2060.jpg


And because I'm STILL waiting for Tamiya to re-label (primer)
some 1st's @ styrene work:

(was a rainy day today.... took a trip to the local hobbyshop to do some Man-Shoppin'!! Loaded up with everything needed to work styrene) I also have a batch coming from Travis, ...OH BTW... his prices are KILLER!! Our local HS had .080 6"x11" for $6.99!!! Anyway....

http://i261.photobucket.com/albums/i...s/IMG_2956.jpg


This back-side cover is cut but I'm still waiting on 1 more 10 LED strobe array then I will drill and hide wires inside. (Batt. for this will be hidden in deck frame.)

http://i261.photobucket.com/albums/i...s/IMG_2957.jpg


I used KH rails for the deck frame, there 4" longer than the R620 stock rails and fit the build better. I made a couple cross-members for this out of 1/4 solid Delrin rod.

http://i261.photobucket.com/albums/i...s/IMG_2958.jpg

rockNmayhem will B making the screw-drive for the role-back just as soon as I get him some good measurements.
I cut a "cover" for these rails from .30 styrene.(didn't like all the factory holes showing) will put on much later.

My uncle works for PPG so I have him chasing the code for my paint choice, he is going to make a few rattle cans for me. It is Scania's Limited Edition Black Amber, I like to think of it as ........ Root Beer.:rolleyes:..:D:D

http://i261.photobucket.com/albums/i...aniapaint3.jpg



All in all ........ here is my 1st synopsis,

Re: Scania R620 Stretched ....first-pitch
 

Hey Mike looking like some progress so far. Way to make an intro to your first build too. I can see I'm gonna have my work cut out for me with that ram for sure, that things a beast!!!

Re: Scania R620 Stretched ....first-pitch
 

nice looking truck so far man cant wait to see that one all fdone :)

Re: Scania R620 Stretched ....first-pitch
 

nice colour choice
how long will the truck be when finnished

Re: Scania R620 Stretched ....first-pitch
 

Thanks Brel,

It will be 37 1/2 in. This is end-to-end, not wheelbase.

Re: Scania R620 Stretched ....first-pitch
 

Update for tonight:

(SORRY guy's... kinda psyched about this 1st build):rolleyes::rolleyes:


some more finish work/trim on light bar/arch. That tiny I-beam stuff is pretty cool, I trimmed out the arch in it.

http://i261.photobucket.com/albums/i...IMG_2956-1.jpg



and my strobe light array (roughed in)

I am staring @ it .. thinking .. "I" built/designed that!!!!!
I can actually do this... ??
Tomorrow will be a big sand/fill/sand again to get it looking somewhat better...
For tonight I am done and turning in pretty proud of myself!!(such a sap!!);)

http://i261.photobucket.com/albums/i...IMG_2957-1.jpg

good night ....

Re: Scania R620 Stretched ....first-pitch
 

You should be proud of yourself, it is looking pretty good.

Is that a sticker for the diamond plate?

Re: Scania R620 Stretched ....first-pitch
 

Thanks Zimm!!

Yes it is (www.mactac.com)

It is pretty realistic looking...


...... I have looked @ a bunch of your builds, you do some impressive work!! Sounds like UR excited about building UR Dad's early days rig!!:)

Re: Scania R620 Stretched ....first-pitch
 

Got another question for ya all:

What do you guy's usually use for a motor? I see most of you use a crawler motor and I have had plenti of crawlers but was just wondering if there was a "prefered" motor and gear ratio for these rigs?

I was thinking of trying a INTEGY 35T but thought it might be to "quick"? I was guessing a 55T but wanted to see what the pro's preferred?

Thanks all!!;)



Mike

Re: Scania R620 Stretched ....first-pitch
 

I use a 55turn and 4:1 gear reduction with stock pinion. Other members us 55turn and a 6 tooth pinion which is about the same as the 4:1 and stock pinion. I was using the Novak Rooster crawler,fifty five combo but since the quit making the fifty five they now use the Terra crawl 55 in the combo but the Terra crawl is a sealed bushing motor so now I guess I will use the integy 55 with the Rooster crawler ESC.

Travis

Re: Scania R620 Stretched ....first-pitch
 

Thanks Travis!!

The 55T/6T sounds easy enough for me!! LOL!!

1 more question:

is Tamiya's gear pitch 48?

Re: Scania R620 Stretched ....first-pitch
 

It should be 32.

Travis

Re: Scania R620 Stretched ....first-pitch
 

Thanks again..... ;)

Re: Scania R620 Stretched ....first-pitch
 

You are welcome.

Travis

Re: Scania R620 Stretched ....first-pitch
 

MIKEY! HURRY UP! I can't wait to see this mammoth come to life.
Now I have a question for you. Are you sure this is your first build?:p;)
Look's pretty good so far, and keep up the good work.
And btw, I love the color choice...root beer... float?:D:D

Big John

Re: Scania R620 Stretched ....first-pitch
 

I can't wait either!!!

There is so much to do!! Waiting for parts and paint is tough!!

This is the first, but thanks for the vote of confidence!!:D

Tonight I finished the light bars and primed and painted them, just need to build a batt. box for them and finish soldering the switches(on/off & momentary). The rails should be here by the middle of next week so it should move pretty quickly after that?
I just ordered the motor and pinion.

Re: Scania R620 Stretched ....first-pitch
 

Looking good there mate, you are making good use of a normally somewhat boring Scania (IMO). It's good to see one stretched out, I don't quite fancy the original 2 axle design.

Can I ask where you obtained those nice scale jack stands ? :cool:

Re: Scania R620 Stretched ....first-pitch
 

My 2 fav.'s are the Scania's & Aeromax.....

Here is a link to the jack stands,

http://cgi.ebay.com/1-10th-Scale-Min...item3cb77621f3

Re: Scania R620 Stretched ....first-pitch
 

@Travis: It appears that Novak has discontinued the familiar 45 and 55 turn. This seems to be its replacement http://www.shopatron.com/products/pr...35X7/135.0.1.1 I use the Novak 55 turn and 6 tooth pinion, so far the results are good, I also have a Holmes 65 turn and 6 tooth, so much torque.....Thanks to Tamiya Cowboy, saved some pounds on Gru's :-)

Re: Scania R620 Stretched ....first-pitch
 

Can you link where to get the 6 tooth pinion from? I have a 55 turn motor for my build, but don't know where to get the pinion. I saw someone mention PMD but was unable to locate it there... Your help is appreciated...

Re: Scania R620 Stretched ....first-pitch
 

@ CrimsonCorsair Here you go...... http://store.rc4wd.com/Pinion-Other-Gears_c_30.html

Be aware there is a bit of modification to be done.

Re: Scania R620 Stretched ....first-pitch
 

Awesome! Thanks. So the 6 Tooth 32 Pitch Hardened Steel Pinion Gear is what I want? Or do I want the 6 Tooth 32 Pitch Hardened Steel Long Pinion Gear? Should I get more than one? Sorry for all the questions - thanks for the help.

Re: Scania R620 Stretched ....first-pitch
 

You want the short not the long and even with the short you will need a spacer to space the motor back a little. As the pnions are tapered a little at the back.

Re: Scania R620 Stretched ....first-pitch
 

Thank you very much.

Re: Scania R620 Stretched ....first-pitch
 

Chimming in a bit late but here is the one I bought last night:


http://cgi.ebay.com/200608918817

Re: Scania R620 Stretched ....first-pitch
 

started some more detail work and almost have the light bar done. (light bar needs touch-up/trim painting and wires run to batt. and switch)

And started on the flatbed controls. 1 more fill n sand, then primer and silver.w/black knobs.

http://i261.photobucket.com/albums/i...IMG_2956-2.jpg

http://i261.photobucket.com/albums/i...IMG_2957-2.jpg


and the controls:

http://i261.photobucket.com/albums/i...IMG_2958-1.jpg

http://i261.photobucket.com/albums/i...s/IMG_2959.jpg

the controls house the 9V for strobe power, soldering wires now. But need to find a handy place for mounting switch? Don't want it obvious..:confused:

Re: Scania R620 Stretched ....first-pitch
 

one of the controls mounted on a micro switch?

Re: Scania R620 Stretched ....first-pitch
 

That is a perfect idea;)

I am going to cut box & make it deeper for switch. Going to use center lever, that will be easiest to mod.



Plus it is a great way to plum all the wires to 1 spot!!:cool:

Re: Scania R620 Stretched ....first-pitch
 

Got Freddies rails in on Fri. and all his work was FANTASTIC!! :cool: :cool:

A "THANK YOU" going out to him!!


Had a few hours this weekend to get a bit more progress, it is starting to look like something now!! Realized today... this thing is l-o-n-g!!


..... AND.... all that work on the light bar was kinda for nothing.... it looks WAY to low and out of scale compared to the height/size of cab!! (see last pic.)

I just ordered a whole bunch of various sized square stock and round stock styrene, gonna build a new one better sized once all that material gets here.

Let me know what you guy's think so far..... ??

http://i261.photobucket.com/albums/i...s/IMG_2968.jpg

http://i261.photobucket.com/albums/i...s/IMG_2967.jpg

http://i261.photobucket.com/albums/i...s/IMG_2969.jpg

Re: Scania R620 Stretched ....first-pitch
 

Mike that truck is looking good. Keeps getting better and better everytime I see it. Keep it up.

Re: Scania R620 Stretched ....first-pitch
 

THANKS!!!

Got the other side completed tonight, now going to work on the frame mount for the deck.
You should be hearing from me pretty soon!! :D:D

Re: Scania R620 Stretched ....first-pitch
 

That looks bad with the three rear axles!

Re: Scania R620 Stretched ....first-pitch
 

Thanks Snowman!!

Re: Scania R620 Stretched ....first-pitch
 

Looks fantastic man, really nice work. Just looks such a perfect length and axle placement.
Am very jealous!

Re: Scania R620 Stretched ....first-pitch
 

Thanks Big Run!!

Next is to paint the cab, all the paint materials have finally shown up!! :cool:

Re: Scania R620 Stretched ....first-pitch
 

got a couple more pics:

Some more progress, but I'm used to painting a body w/one rattler and having extra for the next one....
This build has 3 4oz. rattlers ALREADY and I just ordered 3 more! I thought for sure 3 would be enough!!??:eek: (obvious newb mistake)
I have to lay a few coats on cab and the back of a few parts PLUS the running boards and fenders .. still!!

Anyway, here's a few(if you can see the trans. in finish clear coat(testing waters there) you can see the real finished color on it.


http://i261.photobucket.com/albums/i...IMG_2967-1.jpg


http://i261.photobucket.com/albums/i...IMG_2968-1.jpg

Re: Scania R620 Stretched ....first-pitch
 

looking great! holy is it ever LONG! wow!

Re: Scania R620 Stretched ....first-pitch
 

sure is ... can't deny that!! LOL!!:rolleyes:

Re: Scania R620 Stretched ....first-pitch
 

Looking great! I really like the colour of the trans, should look great! :cool:

Re: Scania R620 Stretched ....first-pitch
 

Lovely build.... now get rid of them holes in the side.