TATRA 15821 CD Capo 8 x 8 truck .
 

Ok here goes .

Up here you will se my new build of the TATRA 8 x 8 truck. Will try to post as much as i can . Just be patient with time .

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

This is a kit I and so far one of the best you get. Personally I think it's even better than Scaleart. They have gone to the enth level of engineering .

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

Here is the pics of the wooden box it came it . The drive train and axles where completely prebuilt.I have attached some pics of them .

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

Here is the pic of the trannsmission pre assembled .its heavy and solid !! . there is a 2 speed gear box and diff lock option. The manual shows how to split and assemble it if you need to . every thing is precision machined to very high quality .

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

Here is some of the details of the drive line .

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

Here is the first of the assembly . The rails have mechanism on the inside for the diff lock.its controlled by the servo. I noticed there where some holes not drilled and tapped hence had to compete those steps.

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

Cool! please keep the pictures coming!
Cheers, Neil.

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

Do u have a link to where I can purchase this kit

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

You can buy it from www.csmi.com.au. Or email info@csmi.com.au

Cheers

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

Here are some more pics for those how requested ........

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

I have just started to assembly the chassis and bits . You will see there is a diff lock activating mech on the inside of the rail

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

Just completed the chassis and the drive line completely mounted together . The engine is well crafted all out of Al and is preicision CNC manchined. The motor and 3 servos is neatly hidden inside. There are 3 serovs steering , 2 speed gear box and diff lock servo.
The steering arms have the lenghts stamped on them .The manual give you a indication how to do but its not very clear. Its imp to work it out or the steering will not work properly......

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

I was lucky to be able to visit TATRA Australia and have a look around in their work shop in Perth . Even got some pics of the demo diff . Look closely you will see the pics of the model drive line placed on the top . Its unreal how robust the real thing is built .Its unbreakable !!!!

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

Capo were selling them for $2600US themselves, Sure beats 4k AUD! :eek:

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

I would pay $2600 if I could find one for that, though with the shipping it would be over3 grand.

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

I know but that was the old price they have bumped the price.More ever you cant even get a reply from them. There are other guys who promise they can sell but i think you will lose your money as they accept only western union and bank transfer . If you get it at that price I am happy to pay $300 as finders fee per truck.Also the au dollar is weak and there is import duty + GST .

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

I doubt you will get it for that price :( . Shipping is $300 the best I could get .

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

Another fine build! :eek:

LUV IT!






Jeff

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

Have put the chassis engine and the drive line together. Its looking good .Found some holes not drilled and tapped .....

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

The next is the cab and to make the wipers work . Going to be tricky ....

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

The cab is nice and study .Lot of space to fill stuff in :)

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

You mean this?

http://i649.photobucket.com/albums/u...h_100_0141.jpg

I got the wiper kit from Topcad, and I think RC4WD carries them as well.

Hope this helps, Big John

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

Hi John they come with wipers just no clear instructions . Thanks for the tip

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

Hi, first post, but … anyway, mine arrived today. I have the later version though, the 15822. On my thumb drive with the assembly stuff was a folder with how to arrange the windshield wipers. It's 35 small pictures.

I think it is specific for the newer model. If you send me your email via PM I will email the folder to you.

(at least if I do not have to have x amount of posts before I can receive a PM)

Side note, the 15822 arrived more assembled, but I will need to take it apart since most of the screws are a loose fit, some are missing and some had come out and were rattling around in the box.

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

Hi Thanks for the support i have got mine working :) . I got the second version too.

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

http://imagizer.imageshack.us/v2/800...0/843/3sy4.jpg
http://imagizer.imageshack.us/v2/800...0/845/jvaw.jpg

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

be carefull with the steering screw if they are too long they can touch the internal gears.

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

Thanks for the tip! Might be the reason why the front axle isn't very smooth compared to the rest! Will check it out when I get around to it.

Notice you have taken the diffs out, was planning on doing that too as to add a bit of lithium grease. Any problem getting that little slider for the difflock back in place?

Send you the pics for the wipers, but seems like you got them working already!

Stephan

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

nice work, i got one too and not yet have time to assembly it, follow this thread can help me later on. thanks for post this up.

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

Well found out why the front axle was not smooth …. Half the screws were not tightened inside the differential case - see picture -… whoever did the pre-assembly wasn't with it … I guess I will take it all apart to check.

Well I can not fault them on the machining on the parts. Everything is beautifully finished and fits perfect. A lot of thought went into this.

Still, having loads of fun and that's what it is all about.

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

Not only was front axle loosely assembled, they didn't put the rubber band on the locking mechanism of the differential … No wonder the whole thing jammed up.

http://i1282.photobucket.com/albums/...ps1716285e.jpg

Ended up taking the whole assembly apart.

Balance: 5 cross threaded screws, and about 50% not tightened. The actual gear mechanisms were properly assembled.

http://i1282.photobucket.com/albums/...ps3d2c782e.jpg

The tool provided by them is perfect for removing and re-inserting the bearings.

Most difficult part in reassembling was the metal clamps that holds on the rubber boots.

The whole thing, from start to finish took me about 8 hours.

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

Hi. New to this forum. Thinking of getting one of these. You say you have a 15822 - the second version. With the rear tray with sides? Did it come as a kit or built up except for RC bits? Where did you purchase it from and how much approx?

Trevor
Canberra, Australia

Re: TATRA 15821 CD Capo 8 x 8 truck .
 

Hi, since you are in Australia, easiest to get it from here I think:
www.csmi.com.au

Should have price on the website.

I got mine in China via a TaoBao Agent ... lots of trouble it was ...

The truck comes as a kit, you still need to buy the motor, ESC, servos etc.

Hope this helps.

If you are interested I have a detailed build thread (German/English) on a German site. Was planning to make one here too, but didn't get around it yet.

Link: http://www.modelltruck.net/showthrea...8x8-Baubericht