RC Truck and Construction

RC Truck and Construction (https://www.rctruckandconstruction.com/index.php)
-   Construction Equipment (https://www.rctruckandconstruction.com/forumdisplay.php?f=6)
-   -   3D Printed D10T Build (https://www.rctruckandconstruction.com/showthread.php?t=10217)

JDH429 04-05-2015 02:20 PM

3D Printed D10T Build
 
Inspired by RCP's cool Bruder conversions.

Going for this in 1:14.

https://lh5.googleusercontent.com/-O...2B16.07.42.jpg

https://lh5.googleusercontent.com/-X...2B12.11.47.jpg

https://lh3.googleusercontent.com/-s...2B18.18.47.jpg

https://lh5.googleusercontent.com/-x...2B09.01.13.jpg

https://lh5.googleusercontent.com/-9...2B10.31.15.jpg

https://lh3.googleusercontent.com/-b...2B10.31.31.jpg

https://lh5.googleusercontent.com/-i...2B10.31.54.jpg

https://lh4.googleusercontent.com/-9...2B10.30.36.jpg

https://lh3.googleusercontent.com/-D...2B14.19.04.jpg

https://lh3.googleusercontent.com/-X...2B14.06.14.jpg

https://lh5.googleusercontent.com/-G...2B14.07.44.jpg

:)

JDH429 04-05-2015 02:41 PM

Re: D10T Build
 
https://lh5.googleusercontent.com/-G...2B14.38.22.jpg

ihbuilder 04-05-2015 02:54 PM

Re: D10T Build
 
Wow Jason , your givin that printer a werkout :eek:

TRUCKMAKER 04-05-2015 07:00 PM

Re: D10T Build
 
This is going to be nice Jason! Keep the pictures coming!

Izzy 04-05-2015 08:49 PM

Re: D10T Build
 
Love the detail. Are you modeling all this or scanning?

Either way nice work!

Izzy 04-05-2015 08:53 PM

Re: D10T Build
 
What size link pins are you using. I never could find proprietary pins. Had to have them made.

bigford 04-05-2015 09:18 PM

Re: D10T Build
 
the fact that your printing every thing is too cool!!!

Roll Rite 04-05-2015 09:44 PM

Re: D10T Build
 
Hi what kind of printer are you using ?

JDH429 04-05-2015 10:26 PM

Re: D10T Build
 
Quote:

Originally Posted by ihbuilder (Post 125391)
Wow Jason , your givin that printer a werkout :eek:

Steve, Yes, Ive got a few hours into this one, and bit more to go.

Quote:

Originally Posted by Izzy (Post 125410)
Love the detail. Are you modeling all this or scanning?Either way nice work!
What size link pins are you using. I never could find proprietary pins. Had to have them made.

Thx, Izzy. I bought 3/16" dia by 1.5" usable length off ebay. Was the best price for 100 at a buck each. Designing everything in cad. I wish i had a scanner that could scan something this small accurately...But then it may be just as much work and time to redesign the components for my needs and fix the model after scanned? Who knows, not familiar with scanners yet, I just CAD whatever i need.

Quote:

Originally Posted by bigford (Post 125416)
the fact that your printing every thing is too cool!!!

Thanks man, I did originally print the pins for the track and they worked fine but figured one of the most wearable parts should be metal. I may reproduce more parts out of metal as i need them and they wear, but this a great way to prototype a model. Wish I had Steve's machining abilities.

JDH429 04-05-2015 10:42 PM

Re: D10T Build
 
Quote:

Originally Posted by Roll Rite (Post 125417)
Hi what kind of printer are you using ?

Search, I wrote a thread all about my stuff somewhere here.


Someone asked me about the strength of the model when its done so i grabbed a scrap piece from this build (lower chassis part) and took these pics to share.

https://lh6.googleusercontent.com/--...2B20.22.41.jpg

Im 200lbs, and am balancing myself with my hand on the counter while my wife took this shot.

https://lh4.googleusercontent.com/-8...2B20.21.10.jpg

These parts made of ABS can be very sturdy, as you can see ( this part is not even constructed with the most dense filling that can be utilized). Of course not as resistant to wear as metal but like i mentioned i will use metal in certain areas, and would prefer to build the whole thing out of steel, but dont have the energy for that and wanted to do a full 3D printed build of some sort and this happened to be it. Atleast this way I can cut the build time in half and do something not yet done.. Anyone seen a 3D printed Dozer yet?

doodlebug 04-05-2015 10:47 PM

Re: D10T Build
 
You can check this scanner out, http://structure.io/ I have to get a new phone before I can try it out.
Cheers, Neil.

JDH429 04-05-2015 11:04 PM

Re: D10T Build
 
Quote:

Originally Posted by doodlebug (Post 125420)
You can check this scanner out, http://structure.io/ I have to get a new phone before I can try it out.
Cheers, Neil.

Neil, Thanks for the link. I saw that a while ago. It was made just to be used on the Ipad I think. Id be interested in knowing how small of details it could grab.. I still think affordable laser scanners are a bit off, but becoming more consumer based due to 3D printing. Ill wait for one of those, but even still having to hollow out the model to be used mechanically would be more headache than its worth..Unless your modeling people and stationary things.:) Just my thoughts..

My cad

https://lh6.googleusercontent.com/-L...2B22.54.09.png

JDH429 04-05-2015 11:13 PM

Re: D10T Build
 
Izzy,

Grooved Clevis
http://www.ebay.com/itm/171655116933

Trucker_Jo 04-06-2015 12:14 AM

Re: D10T Build
 
Very impressive, I cant wait to start CAD at school.

Lil Giants 04-06-2015 01:56 AM

Re: D10T Build
 
Incredible!

If you're in need of a product tester? :)

JDH429 04-06-2015 02:03 AM

Re: D10T Build
 
Quote:

Originally Posted by Lil Giants (Post 125429)
Incredible!

If you're in need of a product tester? :)

If I did need one, can't think of anyone better to call. ;)

Manfred 04-06-2015 03:33 PM

Re: D10T Build
 
Jason,

it looks great. :jaw::jaw: I can hardly wait for what's next. For those parts of my 3D printer would take longer.

Manfred

JDH429 04-08-2015 09:19 PM

Re: D10T Build
 
Quote:

Originally Posted by Manfred (Post 125457)
Jason,

it looks great. :jaw::jaw: I can hardly wait for what's next. For those parts of my 3D printer would take longer.

Manfred


Thank you Sir,


Got some of the body assembled. The platform which the cab sits on is a snap on deal with detents, and the center hood will be removable to access battery.

https://lh6.googleusercontent.com/-b...2B11.38.27.jpg


https://lh6.googleusercontent.com/-O...2B12.35.45.jpg

https://lh4.googleusercontent.com/-K...2B20.43.42.jpg

https://lh4.googleusercontent.com/-_...2B20.43.59.jpg

Have a few dimensions to go back and adjust and reprint on the motor housings, then should be ready to finish cutting the track roller shafts (24- 4mm) and assemble the undercarriage.

mazdaparts 04-09-2015 12:43 AM

Re: D10T Build
 
Nice work. I would put the head of the track pins facing out, looks better to me anyways. Also what is the cost of the material you are using for the printer, and any idea of a finished cost?

Trucker_Jo 04-13-2015 09:02 PM

Re: D10T Build
 
That is looking great! :cool:


All times are GMT -4. The time now is 07:10 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.