Bob's Hauler
OK, so with the frustration the paint has been giving me on my Optimus Prime build, i need to make something where i can feel like i'm making progress.
So, before i build my M1070, i'm going to build another King Hauler with the various extra bits i have left over from the OP build. I've ended up with a spare headache rack, grille, headlights, and all sorts of bits and pieces, so need to use them up! Have a bunch of bits on the way, and started a flatbed trailer today, but am trying to decide what to build exactly. These are 4 of my leading candidates, I'm not going for an exact replica this time, more of an "inspired by" kind of thing. http://members.iinet.net.au/~canison/hauler/1.JPG http://members.iinet.net.au/~canison/hauler/2.JPG http://members.iinet.net.au/~canison/hauler/3.JPG http://members.iinet.net.au/~canison/hauler/4.JPG I'm leaning mostly towards the 4th (red/white), or #3 (Orange). Possibly doing the orange one like the General Lee (flag on the roof, 01 on the sides). The black one is the lowest, but i still like it. Maybe next time? lol Thoughts? |
Re: Bob's Hauler
I like #3 myself, of the two you prefer. #2 is the one I'd suggest doing if it were me :)
https://fbcdn-sphotos-f-a.akamaihd.n...35225577_n.jpg You never go wrong with the 'Stars & Bars' :cool: - RCT |
Re: Bob's Hauler
Only reason #2 is low on the list is that i have one of Brians ali grilles spare. Would be a shame to paint it black.
|
Re: Bob's Hauler
10-4 :D
- RCT |
Re: Bob's Hauler
I like the forth truck best, third truck second.
|
Re: Bob's Hauler
#4 the best with #3 a close second. The color combo looks cleaner on #4.
|
Re: Bob's Hauler
Quote:
If you do #3 or #4, it will still have the double-light headlights, right? I think it would look better rockin' doubles.:D It does seem like you are just replacing one crazy paint job with another!:D:p Can't wait to see an update! |
Re: Bob's Hauler
Yeah I think ill do #4. That will be so much easier to paint than OP, this one is all straight lines!
|
Re: Bob's Hauler
#4 is just straight sick!!! thats my vote
|
Re: Bob's Hauler
1 or 4!:bounce:
|
Re: Bob's Hauler
It'll be based on 4.
And yes it will have double headlights, have a pair spare. Have decided not to do the doublehump fenders from the pic, but mostly because i'm going to do it as a tri-axle. Oh and its always good when you get a box of goodies arrive :) |
Re: Bob's Hauler
Have made a start! Gives me something to work on while waiting for primer to dry on the OP build!
I'm changing the front fenders, and have extended the hood. Chop chop. http://members.iinet.net.au/~canison/hauler/1a.JPG http://members.iinet.net.au/~canison/hauler/2a.JPG |
Re: Bob's Hauler
Bob, I could never cut a line that straight on these bodies, but you sure can! Nice to see you're starting another truck. Looking forward to the progress, especially after seeing what you are capable of, on your Optimus Prime build.
|
Re: Bob's Hauler
I cheated though, I cut along existing lines on the body :P
|
Re: Bob's Hauler
Quote:
The best part is that it goes as fast or slow as you want, and can instantly change directions, or do 90-degree angles. I used this method for cutting my fenders off, and it worked like a charm!:D Tape also works great as a "guide line". Here is a video of the process: http://www.youtube.com/watch?v=0XDFoKaRAhc Sorry to go off on this, Bob. Did you use an X-Acto? What is your plan for the fenders? |
Re: Bob's Hauler
Actually as i mentioned in my OP thread, i used a scribing tool to cut it.
Theres already an engraved panel line where the hood meets the cab, so easy to scribe along to cut. And to cut the sides out, i scribed along the raised line with rivets on. Simple. The fenders will be a simple thin round ones kinda like this: http://www.jonesperformance.com/file...ge/fenders.jpg I've a;ready cut some poly pipe to size, just gotta clean it up a bit before attaching. I've also sanded all the puttied areas now, and re-puttied a few spots that needed it. And have removed all the bolt detail. But i will be replacing the bolts. |
Re: Bob's Hauler
Quote:
Next up will be a HET M1070. Am already planning the parts, since this one should be a quick build. (famous last words?) lol |
Re: Bob's Hauler
looks great so far, i'm voting for #1 or 4
|
Re: Bob's Hauler
Got the sides of the hood trimmed up, cut the fenders from polypipe, and added a side to them from styrene. Have to smooth off the bottom of the fenders, and may add a small lip to them on the inner radius.
http://members.iinet.net.au/~canison/hauler/3a.JPG http://members.iinet.net.au/~canison/hauler/4a.JPG |
Re: Bob's Hauler
Quote:
Quote:
|
Re: Bob's Hauler
Got a load of deliveries today!
Theres just something special about getting a nice big box with Tamiya written on it. I've had plenty of different brands of RC cars, but no-one takes quite as much pride in their boxing as Tamiya. Also got an extra axke and tyres from Joe (wheels leftover from my OP build), plus extra shocks and 55T motor. Also ali suspension arms, chassis braces, tank mounts etc. Also have a Tamiya roof spoiler to add to it. Just waiting on chassis rails to arrive and can start construction. http://members.iinet.net.au/~canison/hauler/5.JPG |
Re: Bob's Hauler
Woo-Hoo :jump: More building material Nothing could be better from the postman :D :D :D
:drool: A NEW KING HAULER :drool: Have FUN Bob :bounce: - RCT |
Re: Bob's Hauler
Alrighty, chassis rails came in, so got drilling, and have the rolling chassis done!
I swapped the shock bodies from a trailer to get silver ones for the rear. Didnt bother with the front as you wont see them under the body. Still have the black plastic rear suspension arms on the 3rd axle, but have some silver ali ones on the way. I have a blank bumper from Russ, and one of his polished 5th wheel plates yet to fit. Plus of course build the gearbox, add servos, tanks, steps etc. I havent trimmed the rear of the chassis rails yet. Waiting on a rear light plate and mudflap mounts from gardentrucking. http://members.iinet.net.au/~canison/hauler/6.JPG http://members.iinet.net.au/~canison/hauler/7.JPG http://members.iinet.net.au/~canison/hauler/8.JPG http://members.iinet.net.au/~canison/hauler/9.JPG http://members.iinet.net.au/~canison/hauler/10.JPG |
Re: Bob's Hauler
Ahh, good catch. Will do.
|
Re: Bob's Hauler
why not one of your designs and not a copy of someone's else's design ,that way it is you and not you doing someone's else's
|
Re: Bob's Hauler
Quote:
|
Re: Bob's Hauler
Quote:
why are you copying a known design. and not making one of your own ideas |
Re: Bob's Hauler
Quote:
|
Re: Bob's Hauler
Whos build am I copying? Theres very few ways to attach a 3rd axle, and I havent seen anyone elses build that looks like this.
|
Re: Bob's Hauler
Quote:
and I was just wondering why copy it has nothing to do with your skills [which are wonderful,or your past trucks ] or the third axle was just posting about the first four or five posts and it put my post at the back |
Re: Bob's Hauler
nevermind it is not worth upsetting you ,I just like new paint schemes and like to see what comes out of people heads
|
Re: Bob's Hauler
Quote:
|
Re: Bob's Hauler
OK, i'm with you now. You sounded like you were saying i'd copied someone elses build.
Those 4 trucks are inspiration only, i'm not actually copying it. Copying a real truck is more work than building your own design anyway. I just kinda liked the red on white look of the one i'm doing. |
Re: Bob's Hauler
Productive weekend!
Stripped it down and drilled the various holes in the tops of the frame for fuel tank mounts, gearbox etc, and got all that fixxed. Also flipped the 3rd axle which i had back to front. Added the 5th wheel on a nice shiny ali plate from Russ. Still have a bumper, and headache rack to fit, and may look at adding some sort of toolbox under it. The body is coming along. Some final sanding, a little bit of trim on the front fenders, and its ready for paint! http://members.iinet.net.au/~canison/hauler/11.JPG http://members.iinet.net.au/~canison/hauler/12.JPG http://members.iinet.net.au/~canison/hauler/13.JPG http://members.iinet.net.au/~canison/hauler/14.JPG |
Re: Bob's Hauler
Looking good
|
Re: Bob's Hauler
Bob what happened to this build???
Wayne |
Re: Bob's Hauler
Oh ya! Love the tri-drive. I wanna see more!!! Lol :)
|
Re: Bob's Hauler
Its not been forgotten, just havent done much on it for a while. Its pretty much exactly the same as it was in the most recent pics above, with the exception of the wheels.
I suppose I should really finish this one before working on my M1070. Of course I still need to finish my trailer for Optimus too! Have added a load of Integy ali wheels, these: http://www.integy.com/C25022RED.jpg And these: http://www.integy.com/C25023RED.jpg |
Re: Bob's Hauler
Lol your just like me bro, your hands are always in between projects and dont seem to finish one completely lol
|
Re: Bob's Hauler
Well this one is kind of a "spare parts" build with leftovers, so doesnt have top priority.
|
All times are GMT -4. The time now is 01:07 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.