Steering mods for a Tamiya Scania.
 

Hi again, I've been looking around at various places for info on making the truck steer better. ie: smaller radius. I noticed that a lot of trucks have the steering servo in the front of the truck as opposed to on the side rail. I've also seen guys bend the steering link to clear the rest of the pieces under the truck. What is the "preferred" way of doing this? I also would be appreciative if there were instructions on how to accomplish this mod. THANKS

Re: Steering mods for a Tamiya Scania.
 

Hi,

if you want to use the original axle, you can modify it in this way:

http://www.bilder-hochladen.net/file...qp-gf-ffea.jpg

I also rotated the axle so hat the servo is sitting in front of the axle and the steering link behind the axle.

http://www.bilder-hochladen.net/file...qp-jc-71a3.jpg

Re: Steering mods for a Tamiya Scania.
 

Try this?
http://www.rctruckandconstruction.co...ad.php?t=12133

Re: Steering mods for a Tamiya Scania.
 

Have a look at this thread KH Beam Hauler
Bo has done a how to on steering mod

Re: Steering mods for a Tamiya Scania.
 

Great Tip !! Thanks

Re: Steering mods for a Tamiya Scania.
 

Thanks for the help. I will check it all out.