RC Truck and Construction - Custom build of a Kenworth C509 as autralian roadtrain

RC Truck and Construction (https://www.rctruckandconstruction.com/index.php)

- Australian Rigs & Roadtrains (https://www.rctruckandconstruction.com/forumdisplay.php?f=18)

- - Custom build of a Kenworth C509 as autralian roadtrain (https://www.rctruckandconstruction.com/showthread.php?t=9028)

Re: Custom build of a Kenworth C509 as autralian roadtrain

I LOVE the attention to detail you've put into this so far. I'll anxiously be watching this build!

Re: Custom build of a Kenworth C509 as autralian roadtrain

Re: Custom build of a Kenworth C509 as autralian roadtrain

Hi...

2 little steps.

1. I want to use smaller seals for the side windows, but I need something to give them the possibility to hold the window.

Before

http://up.picr.de/30693697yh.jpg

http://up.picr.de/30693700qt.jpg

After

http://up.picr.de/30693755xb.jpg

2. I wanted to fix the grill at the bonnet. It's planned to fix the grill from behind.

I drilled holes and threaded them.

http://up.picr.de/30693694su.jpg

After that small pieces if brass are solded into the outside of the holes and sanded until it's no longer seen.

http://up.picr.de/30693695aj.jpg

http://up.picr.de/30693687bn.jpg

http://up.picr.de/30693690si.jpg

http://up.picr.de/30693691yu.jpg

http://up.picr.de/30693692ex.jpg

Now the grill can be screwed to the bonnet.

http://up.picr.de/30693685du.jpg

http://up.picr.de/30693702gx.jpg

http://up.picr.de/30693704uo.jpg

http://up.picr.de/30693706aj.jpg

http://up.picr.de/30693708yc.jpg

Re: Custom build of a Kenworth C509 as autralian roadtrain

Looking good Gizmow! Glad to see you back at this.

Re: Custom build of a Kenworth C509 as autralian roadtrain

Hi, I've masde an inlay for the grill, now it's looking more complete.

http://up.picr.de/30758557bh.jpg

Re: Custom build of a Kenworth C509 as autralian roadtrain

That's a sweet looking ride you've got going on there! I wish my build skills were talented enough to pull off something like that.

Re: Custom build of a Kenworth C509 as autralian roadtrain

Nicely done! looks good.

Re: Custom build of a Kenworth C509 as autralian roadtrain

Das ist prima!
Your english is much better than our deutche.

The cab and sleeper are looking great!

Re: Custom build of a Kenworth C509 as autralian roadtrain

Hi...

many thanx for your reply... ;)

While the sleeper is drying, I had a look at the lower parts of the fenders. They were mounted as one piece directly to the frame, but I want to have them split and mounted to the floor of the cabine, so that I can adjust them individually.

I assume, the work brought the wanted result.

http://up.picr.de/30815715ed.jpg

http://up.picr.de/30815716ss.jpg

http://up.picr.de/30815720vn.jpg

http://up.picr.de/30815722fl.jpg

Another advantage is, that I do have more space on the frame for the electronic components.

http://up.picr.de/30815724mz.jpg

Re: Custom build of a Kenworth C509 as autralian roadtrain

Hi..

At the weekend I found some King Hauler parts and I decided to use the air filters for the C509, but they must be modified, because it must have air pipes with air entry parts (I don't know the englisch word) on the level of the roof of the cab. The pipes shown on the pictures are not the final part.

I only have 8mm brass tubes and 6mm round full brass rods. So I created 2 pieces that will be soldered on both sides of the pipe.

To get the holes centered in the rod, I took a piece of the 8mm pipe to get the drill centered. On one side I made a 3mm thread, on the other side a 4.5mm hole to place the "nose" of the air entries in.

http://up.picr.de/30880184bl.jpg

http://up.picr.de/30880185kp.jpg

http://up.picr.de/30880190du.jpg

After that I started to assemble the parts.

http://up.picr.de/30880194qb.jpg

http://up.picr.de/30880196gp.jpg

http://up.picr.de/30880197qk.jpg

http://up.picr.de/30880202hl.jpg

Final position (please keep in mind, the pipes will be longer in the final version.

http://up.picr.de/30880212aa.jpg

http://up.picr.de/30880181xj.jpg

http://up.picr.de/30880182vx.jpg

Later I will remove the chrome, all "chrome parts" will get the same color.

That's it for today.

Re: Custom build of a Kenworth C509 as autralian roadtrain

Job well done creating your own filters.

Re: Custom build of a Kenworth C509 as autralian roadtrain

Nice work!! everything you have done is excellent!

Re: Custom build of a Kenworth C509 as autralian roadtrain

I LOVE how the mirror looks

Re: Custom build of a Kenworth C509 as autralian roadtrain

Quote:

Originally Posted by gismow (Post 159815)

http://up.picr.de/31051793ac.jpg

Your assembly/soldering jig is terrific. Who makes it or what is the brand name? I want to see if I can find something similar here. Very nice brass work.

Re: Custom build of a Kenworth C509 as autralian roadtrain

AWESOME work! Keep posting!!

-Terry