RC Truck and Construction

RC Truck and Construction (https://www.rctruckandconstruction.com/index.php)
-   Construction Equipment (https://www.rctruckandconstruction.com/forumdisplay.php?f=6)
-   -   Volvo A40F (https://www.rctruckandconstruction.com/showthread.php?t=9095)

Hemi1966 06-22-2014 03:22 AM

Volvo A40F
 
Hi guys, I've been quiet for some time, but I finally had time to start a thread for my new project, Volvo A40F.
Here's the real thing:
http://i327.photobucket.com/albums/k...psf5e50133.jpg


I will do the axles first and the idea is to use normal axles and add a planetary gear to the hubs:
http://i327.photobucket.com/albums/k...ps6d275e09.jpg
http://i327.photobucket.com/albums/k...psc7844202.jpg


The axles need to be widen and the drive shaft outer ends should be different to run the planetary gears.
So the first thing is to make a new longer drive shafts. Here are the originals:
http://i327.photobucket.com/albums/k...ps3c447ed9.jpg

apfubar 06-22-2014 05:47 AM

Re: Volvo A40F
 
Nice planetaries... Where did you get those from?

Also I like the diff lock... :-)

Cheers,
AP

Hemi1966 06-22-2014 07:59 AM

Re: Volvo A40F
 
Quote:

Originally Posted by apfubar (Post 112953)
Nice planetaries... Where did you get those from?

Also I like the diff lock... :-)

Cheers,
AP

Those are from AFV-Model: http://www.afv-model.com/4711shop/pr...oducts_id=3434

avel 06-22-2014 08:51 AM

Re: Volvo A40F
 
Oh wow, I thought the planetary was something that you made, I never knew they sold such a product.

Snochaser 06-22-2014 09:08 AM

Re: Volvo A40F
 
What scale Reg? Or will this match your other models scale. Big in other words.

Ben

Hemi1966 06-22-2014 09:33 AM

Re: Volvo A40F
 
Quote:

Originally Posted by Snochaser (Post 112961)
What scale Reg? Or will this match your other models scale. Big in other words.

Ben

I'm not Reg:) so mine are "small" 1/14 scale;)

Here are the new drive shafts (the longer ones)

http://i327.photobucket.com/albums/k...ps2c6520ef.jpg

Espeefan 06-22-2014 11:33 AM

Re: Volvo A40F
 
Nice. Subscribing for the updates. As always, I enjoy watching your builds. The planetary drives look interesting.

thercfreak2012 06-24-2014 01:51 PM

Re: Volvo A40F
 
Wow good luck my friend

Lil Giants 06-24-2014 03:01 PM

Re: Volvo A40F
 
An interesting start to a new project Ari, it's good to see you focused again :cool:

Snochaser 06-24-2014 07:34 PM

Re: Volvo A40F
 
My mistake Ari. I know better......;).

RCKiwi 06-24-2014 11:14 PM

Re: Volvo A40F
 
Those reduction hubs are crafty! I've just spent quite a while designing my axles for my 966 build - I've gone inboard with the planetary reduction similar to wedico but I must say, these units do look the business. I'll be watching this with a keen interest.

Dieselchopper 06-25-2014 07:46 PM

Re: Volvo A40F
 
Where did you get the planatarys? Or did you make them?

rc entreprenøren 06-26-2014 04:43 PM

Re: Volvo A40F
 
As always it is a pleasure to see that you start with a new project ..
Is a good dump truck in real life..

elliot330 06-27-2014 07:32 AM

Re: Volvo A40F
 
Nice start Ari. - Did the tyres arrive yet?

Hemi1966 06-27-2014 10:14 AM

Re: Volvo A40F
 
Quote:

Originally Posted by elliot330 (Post 113178)
Nice start Ari. - Did the tyres arrive yet?

Yes ages ago, thanks Elliot.

RCP57 06-27-2014 11:04 AM

Re: Volvo A40F
 
Very interesting start Ari with those planetary gears! What axles are you using and what is the overall width with the planetaries installed?

Thanks, Reg

Hemi1966 06-27-2014 12:21 PM

Re: Volvo A40F
 
Quote:

Originally Posted by RCP57 (Post 113184)
Very interesting start Ari with those planetary gears! What axles are you using and what is the overall width with the planetaries installed?

Thanks, Reg

I decided to start with the axles to see if it's possible to add those planetary gears to these axles.
The width I'm aiming is 192 mm hub to hub.

It needs several parts to attached the planetaries to axles. Also the bolt pattern on planetaries don't match with the rims I'm using, so I had to make a new hubs over them.

Here are the parts for one side:
http://i327.photobucket.com/albums/k...psc87e2d97.jpg

http://i327.photobucket.com/albums/k...ps241cf2fb.jpg

http://i327.photobucket.com/albums/k...psd60e28c3.jpg

http://i327.photobucket.com/albums/k...ps59613839.jpg

http://i327.photobucket.com/albums/k...psac239670.jpg

http://i327.photobucket.com/albums/k...ps50edfe84.jpg

RCP57 06-27-2014 12:53 PM

Re: Volvo A40F
 
Wow that looks awesome Ari! We are all glad to see you back in the game.

Where did you buy the axles from? I am looking for a set with the raised(offset) input/output shaft like I built for my Kenworth. I have seen pictures of an axle that I believe was made by Rigidrc online that had this but can't find any for sale. I may have to build my own again or use something like you are using. I can't afford to buy the $400 Euro a piece German axles!

Hemi1966 06-27-2014 01:07 PM

Re: Volvo A40F
 
Quote:

Originally Posted by RCP57 (Post 113186)
Wow that looks awesome Ari! We are all glad to see you back in the game.

Where did you buy the axles from? I am looking for a set with the raised(offset) input/output shaft like I built for my Kenworth. I have seen pictures of an axle that I believe was made by Rigidrc online that had this but can't find any for sale. I may have to build my own again or use something like you are using. I can't afford to buy the $400 Euro a piece German axles!

Thanks Reg:)
These axles came from RigidRC.
Are these what you are looking for http://www.rigidrc.com/shop/axle-hou...-14-truck.html

RCP57 06-27-2014 02:12 PM

Re: Volvo A40F
 
I can't open the link Ari. Is it just me?


All times are GMT -4. The time now is 07:23 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.