first build blues
 

I want to do a tracked Jd tractor for my first build. I'm having a tough time trying to figure out what type of drive motors to use. I want to do a geared motor direct drive Any help would be greatly appreciated so far as what to buy and where to buy. Im in the states. Also a brief list of electronic parts needed would be awesome. Thanks in advance

Re: first build blues
 

It can be daunting to begin, but keep at it. :)

I bought my motors and electronic speed control (ESC) from Fingertech Technologies as they were smaller and a better fit for my project. Since your tractor is bigger, you may be able to handle the stronger RB 35 type motors.

Here are the website I browse for motors and other gear:
http://www.servocity.com/
http://www.robotshop.com/

Servocity has a few new models out, and they supply parts to RobotShop.

I am unsure what people are using for ESC when paired to the gear motors. Robotshop has a few controllers that would be worth checking out. Aside from the ESC, you may need to find a proper battery eliminator circuit (BEC), a receiver/transmitter, and a servo for the 3pt hitch if you desire. Since its a track drive, you would actually need 2 ESC so you can control the speed of each motor to be able to steer.

Some people use continuous rotation servos. They seem to work great, and require less space. ESC are not needed. If you go with 2 servos, you would need a receiver/transmitter, a BEC, and a 3rd servo for the 3 point hitch if your going to bother.

Re: first build blues
 

Thanks for the advice. I truly appreciate it

Re: first build blues
 

This might be a good thread for you to follow:
http://www.rctruckandconstruction.co...ead.php?t=9182

There are others like it as well.

Re: first build blues
 

Maybe you find some here ("RB35 type")

http://mfz-blocher.de/getriebemotoren.html

Re: first build blues
 

Hope this helps, le'me know if can help


http://rctruckandconstruction.com/showthread.php?t=3512

Re: first build blues
 

Thanks i truly appreciate the help and warm welcome.

Re: first build blues
 

I have two motors that draw 120ma at no load how much battery would I need for about and hour of running

Re: first build blues
 

Progress