HIAB X-HIPRO 1058 loader crane
 

This is a build of a Hiab 1058 loader crane. It will be mostly made out of steel and brass.
I don't have any truck to put it just yet :confused:

https://i.postimg.cc/52zLq1DV/hiab-8...00x845-new.png

https://i.postimg.cc/wvTv5cCK/Koko-n...-72435-bmp.jpg

https://i.postimg.cc/Dzc0bYYd/Koko-n...-72116-bmp.jpg

https://i.postimg.cc/Ss76Rrcw/HIAB-X-HIPRO-1058.jpg


Here's some parts I made so far.

https://i.postimg.cc/ZqX7pVBn/IMG-1107.jpg

Re: HIAB X-HIPRO 1058 loader crane
 

https://i.postimg.cc/RhrN0nVJ/Main-boom-v60.jpg

https://i.postimg.cc/d1Zhv9vK/IMG-1126.jpg

Re: HIAB X-HIPRO 1058 loader crane
 

As this is a quite large crane, the cylinders are big. Both main cylinders have 26 mm pistons and the piston rod is 18 mm.

https://i.postimg.cc/HszsqN5y/2-sylinteri-v13.jpg

Re: HIAB X-HIPRO 1058 loader crane
 

I just know it will be awesome :) Put it on the ATD :D

Re: HIAB X-HIPRO 1058 loader crane
 

Actually not a bad idea :)
I saw not so long ago one older Volvo ATD with loader crane and small bed in a power line construction site.

Re: HIAB X-HIPRO 1058 loader crane
 

Start of the main cylinders :)

https://i.postimg.cc/fLCnkVsT/IMG-1129.jpg

Re: HIAB X-HIPRO 1058 loader crane
 

titandigs (Paul) daily driver looks like your top photo, though his trk may be a Volvo, he pulls 2-3-4 trls at a time hauling containers & cargo... you could make an 8x8 to haul all your gear to the site.

Re: HIAB X-HIPRO 1058 loader crane
 

Now this looks like a very cool project ! Will be interested to see the end product :)

Re: HIAB X-HIPRO 1058 loader crane
 

can u make 2

Re: HIAB X-HIPRO 1058 loader crane
 

Today I made the cylinder caps. The thread on them is M27x1

https://i.postimg.cc/zvfWzcnv/IMG-1139.jpg

Re: HIAB X-HIPRO 1058 loader crane
 

Those are quite beefy! :)

Re: HIAB X-HIPRO 1058 loader crane
 

I had to make a custom wrench for the caps :)

https://i.postimg.cc/ydGCXRtL/IMG-1142.jpg

https://i.postimg.cc/HxnCyzZJ/IMG-1143.jpg

Re: HIAB X-HIPRO 1058 loader crane
 

I got the piston rods done :)

https://i.postimg.cc/vZLz3Qbg/IMG-1157.jpg

https://i.postimg.cc/fTdtwJ0p/IMG-1160.jpg

https://i.postimg.cc/T3XyhfVw/IMG-1163.jpg

Re: HIAB X-HIPRO 1058 loader crane
 

This is an awesome project!

Re: HIAB X-HIPRO 1058 loader crane
 

Amazing work!!

Re: HIAB X-HIPRO 1058 loader crane
 

I got the pistons done :)

https://i.postimg.cc/KzCsx8Rc/IMG-1206.jpg

https://i.postimg.cc/1t8YkqRY/IMG-1207.jpg

Re: HIAB X-HIPRO 1058 loader crane
 

Them pistons are beautiful. just like the rest of the craftsmanship we've seen from you.

Re: HIAB X-HIPRO 1058 loader crane
 

Now that the forum is back up, here's the progress of last weekend :)

https://i.postimg.cc/9Xwdb0PW/IMG-1260.jpg

https://i.postimg.cc/kGSWgYMV/IMG-1280.jpg

https://i.postimg.cc/tTYhLCLN/IMG-1286.jpg

https://i.postimg.cc/k4mmHBVk/IMG-1300.jpg

https://i.postimg.cc/qvW08mpB/IMG-1302.jpg

https://i.postimg.cc/Z5W4vktD/IMG-1308.jpg

Re: HIAB X-HIPRO 1058 loader crane
 

Nice work Hemi ! :)
You make me want to try milling some of those steel sheet on my cnc router. What’s your feeds and speeds for a base guide line ?

Re: HIAB X-HIPRO 1058 loader crane
 

For the contours I'm running at 300mm/min, and fairly small cuts, around 0,3-0,4mm. The main problem is heat generation, I only have a mist coolant on my machine, so it's not as effective as proper flood coolant.