Vertical Ribbed Dump Trailer
This one has been waiting in the background for a while but I finally got the frame drilled and tapped today to mount the suspension. It will be similar to the old school trailer but with taller sides and some other changes. I don't have much to show for now but over the couple of weeks things should start coming together.
Chassis...Tri-axle with airbags http://i1293.photobucket.com/albums/...psfrpja3db.jpg For sale, 1 near new, barely used 2.5x0.4mm metric tap. Could use some TLC but is still sharp as it only threaded 7 holes...:rolleyes: http://i1293.photobucket.com/albums/...psxwzf1dc4.jpg |
Re: Vertical Ribbed Dump Trailer
Weld it together again I know you can do it ! Mike
|
Re: Vertical Ribbed Dump Trailer
Here's what I shared with Reg to give him a rough idea of what I wanted :)
http://i63.tinypic.com/33zb5lx.jpg |
Re: Vertical Ribbed Dump Trailer
Quote:
|
Re: Vertical Ribbed Dump Trailer
Thankfully I can moderate posts within my Vendors section. If the trailer I build turns out nothing like that one I can delete the picture you posted.lol Just kidding.
|
Re: Vertical Ribbed Dump Trailer
I've never seen a tap break in two places before at the same time :confused:
|
Re: Vertical Ribbed Dump Trailer
Lmao that's one plus of being a mod :lol: The tap sure got hot before snapping looking at the discolouration.
|
Re: Vertical Ribbed Dump Trailer
Quote:
The tap didn't get hot. That's just the coating they apply(gold color). You can see that they are not the best quality as the coating has already worn off the tip after tapping just a few holes. They actually cut fairly well but it slipped between my thumb and finger causing it to "flick" sideways and breaking. I'm glad I bought two or I would be in trouble! |
Re: Vertical Ribbed Dump Trailer
Just an idea....I use one of this : http://www.micromark.com/microlux-ta...ture,8363.html
|
Re: Vertical Ribbed Dump Trailer
I do have one of those Bo but I've never used it. I'm sure it would work well though. I had the frame set up in the vise on my mill and was tapping a few holes by hand as I went so that I could install the suspension and figure out the best axle spacing. I was tapping a hole close to the chuck on the mill and didn't really leave enough room for a good grip. My fingers slipped and boink. It was my fault for not giving myself more room and they are Chinese taps so the quality isn't great. Thankfully I was able to wind the broken piece out. Once the rails were taken off the mill freehand tapping was no problem but it did make me say bad words when the brand new tap broke.lol
|
Re: Vertical Ribbed Dump Trailer
oh snap tap!!. i got a set of metric body mount size drill and tap from my buddy in england
when he did my locker box. i went to 3 tool stores by me and could only get that size in a large set with you living on that remote island up there it has to just as tough.... LOL |
Re: Vertical Ribbed Dump Trailer
nice trailer by the way!!!
|
Re: Vertical Ribbed Dump Trailer
Hey Reg thats gonna be a great ooking trailer when your done. Polished aluminum or powder coating
|
Re: Vertical Ribbed Dump Trailer
I'll be polishing her up when completed no powdercoating for this dumper. Only the chassis will be black.
|
Re: Vertical Ribbed Dump Trailer
polish then clear coat like the big ones?
|
Re: Vertical Ribbed Dump Trailer
Ya going to clear coat it when done polishing. Don't feel like re-polishing the trailer every time she gets put to work lol
|
Re: Vertical Ribbed Dump Trailer
10-4
|
Re: Vertical Ribbed Dump Trailer
Polished till it glows in the dark !
|
Re: Vertical Ribbed Dump Trailer
That's the plan :D
|
Re: Vertical Ribbed Dump Trailer
Trailers, trailers, everywhere:eek:. Not a lot of progress on this one but a little. I have been working as quickly I as can the last few days with my fingers on a few different projects. I made some time today to start the tub on this one. The sides on this seem tall to me but I think it is actually about right when compared to the trailer Brandon posted. I'm sure it will look a lot different once the ribs are added also. It's not too late if you feel it's too tall Brandon. More to come soon....
http://i1293.photobucket.com/albums/...psfrfqfrzt.jpg http://i1293.photobucket.com/albums/...pskv14lmak.jpg |
All times are GMT -4. The time now is 07:37 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.