Introduction
 

Hi I’m Ian and I'm the sales manager at Firgelli Technologies. As an avid RC'er I thought I’d start with a little introduction to our products. We at Firgelli produce 18 models of actuators that are RC plug n play, plus another 3 (PQ12-6v) that can be used via RC with our controller board.

The L12-R
Attachment 4144

This is our standard 6V receiver–ready linear servo. Plug it into your receiver and it works just like an analog servo. It comes in 3 stroke lengths: 30mm, 50mm and 100mm
and 3 gearing options:
50:1 Max speed: 23mm/sec Max load: 2lbs
100:1 Max speed: 12mm/sec Max load: 5lbs
210:1 Max speed: 5mm/sec Max load 10lbs

The L16-R:
Attachment 4145
Our new, more powerful 6V receiver–ready linear servo. Plug it into your receiver and it works just like an analog servo. The L16-S series comes in 3 stroke lengths: 50mm, 100mm and 140mm
and 3 gearing options:
35:1 Max speed: 32mm/sec Max load: 10lbs
63:1 Max speed 20mm/sec Max load: 20lbs
150:1 Max speed: 8mm/sec Max load: 40lbs


The PQ12-P with LAC:

The PQ12-P is our smallest actuator, it has one stroke length, 20mm and 3 gearing options:
30:1 Max speed: 25mm/sec Max load: 1.5 lbs
63:1 Max speed: 12mm/sec Max load: 4lbs
100:1 Max speed: 9mm/sec Max load: 6lbs
Attachment 4146

The PQ12-P does not have its own internal controller, so an external controller board (like our Linear Actuator Control Board or LAC) must be used for it to understand an RC signal. The LAC board is always ½ price when purchased with a “P” series actuator.

Attachment 4147

Feel free to contact me if you have any questions on using our actuators, I try to answer every email before I go home each day.
Yup, I hate waiting for replies too!

Ian Greig
Firgelli Technologies
sales@firgelli.com
888-225-9198
http://store.firgelli.com

Re: Introduction
 

Welcome aboard Ian, we're happy to have you here on our forum. :)

I look forward to using some of your hardware in my future projects. :cool:

Re: Introduction
 

Welcome aboard!
Cheer's, Neil.

Re: Introduction
 

Welcome aboard Ian. Does it mean members of the forum will get special discount on your actuators?
Jack

Re: Introduction
 

Thanks for the welcome guys.

"Does it mean members of the forum will get special discount on your actuators?"
First question is always the same on every forum. ;)

I have been known to launch coupons for no reason at all.

But before you tag us as expensive, understand our "R" series actuators came down in price from $90US/unit to $70US/unit in Jan 1013. Then in Dec 2013 we lowered our shipping rates (like who does that?) after we got FedEx and UPS into a dogfight over our business. UPS won.

Our esteemed leader actually wants them to be affordable. And now combined with our L16-R line, we have 18 models of linear servos to help power your projects.

Ian

Re: Introduction
 

I was just kidding,but never hearts to ask.....
You will not believe how many times I asked and lady's said: yes.
Jack

Re: Introduction
 

No absolutely! You never know unless you ask.

Re: Introduction
 

I really like your products and have a handful of them. Been waiting for you to join. Welcome Ian.

Ben

Re: Introduction
 

Ian - Welcome aboard. I have used your products on several builds - very happy with the results. I an happy that you chose to join up with us here.

Izzy

Re: Introduction
 

Welcome to the forum! Is it possible to stop by the store in Victoria and buy things?

Reg

Re: Introduction
 

Welcome to the forum. As already mentioned, I too have a few of your products in my builds. Great products to use.

Re: Introduction
 

Welcome aboard Ian, you helped me a while back with 12 actuators that I got for a project and ended up not using any of them.... And can't find where most of them went :D

Ayoub

Re: Introduction
 

I cant find any of my 12.......:p........... Ian welcome to the group... I need to become much more familiar with the actuators....

Michael

Re: Introduction
 

Thanks for the welcome everyone.
You've all been so nice, I'm going to start a new thread and launch a coupon for you.

Ian

Re: Introduction
 

welcome ian i have a pretty big project that has been in the works for awhile now:cool: so i will also be hitting up for some in the very near future;)

Re: Introduction
 

I love to see pictures and videos of your creations so don't be shy about showing me whatcha got!
One of the best things about my job is seeing what everyone uses our actuators for.
The only thing I've done with them so far is putting retracts on my Quad.
http://youtu.be/P-fblcKnh_M
http://youtu.be/dp1A6DCdZsI
Sorry for the video quality :o I was sort of bouncing around that day.
I'm mainly an air guy but I do have a couple of SC 4x4's I race locally, so there's still hope for me.
And I love everything RC....

Re: Introduction
 

Sorry Reg I didn't see your post. Yes if you call ahead, you can pick up your order at our secret 18 acre lakeside retreat\office. We're not really a retail outlet, but you can pickup here if you're on the island.

Re: Introduction
 

Sure, sure.... You just don't want to have to see me in person... I understand. Haha. That sounds great. I'm not too far away in Sooke.

Reg

Re: Introduction
 

Sooke! That's very close. Our office is on Elk Lake.
I'll be out in Sooke a bit this summer checking out PacWest RC's new field.
I live on the Malahat myself.

Re: Introduction
 

I would like to say that I ordered one of these actuators just over a week ago from Ian.
The service was great, fast shipping with UPS and the actuator has been put into the project I had in mind. It works very well and I am very happy with the result.:)
Thanks Ian