fuel tank caps
 

would these look alright for fuel tank fill caps ? http://www.mcmaster.com/#thumb-screws/=as05cz

Re: fuel tank caps
 

Good idea! I think they would look great. there are ones that are 4/40 sized with a 5/16" thick head.

Re: fuel tank caps
 

I agree. Polished would look awesome.

Re: fuel tank caps
 

The larger sizes could be used for air intake covers. Precleaner's, what ever you want to call them. Later, Neil#2 aka doodlebug.

Re: fuel tank caps
 

Even the smaller sizes might be too large in my opinion. PMD has or had nice looking ones in black plastic. I know, Steve, we can make metal ones but when in a pinch buying is easier than making plus I like the finger grooves in them.:)

Lynn

Re: fuel tank caps
 

I remember seeing them I just didn't remember where :confused: yes I could make them but , these tanks need to go out and I got so much going between getting unused excavating equip. moved and getting a cnc mill and lathe and set up + getting orders done . I got the mill now I need to get the lathe and the bigger the spindle bore the better :)

IHSteve

Re: fuel tank caps
 

well when I picked up my band saw blades I did some scrounging and these are close to the wedico 1's but in brass or stainless . hope you can see this cam s@#ks

http://i830.photobucket.com/albums/z...r/PIC_0825.jpg

http://i830.photobucket.com/albums/z...r/PIC_0823.jpg

the brass 1 is in the tank and stainless 1 is on the key hook .

Re: fuel tank caps
 

I think they look good

Didn't know you were doin tanks now