rc digger gearing
 

hi guys right after a bit of advice now I'm posting on my iPhone so can't post pics at the mo but I'm after pics and gear sizes what is used in say for e.g the wideco cat 745 digger I plan to use similar set up but need to know how it's geared I know the motor is running inside the tracks with rod n worm drive to rear of drive sprocket is there any chance of one of u owners to take the cover off to show me the gubins and motor size gear size ?

Re: rc digger gearing
 

Hey deamon, not sure i'm following the model #'s but try these link's,
http://www.wedico.de/eng/radlader.asp
http://www.wedico.de/eng/dumper.asp Some of the other member's can comment on the motor size and rpm's. The link's do mention some of the gear ratio's. Just realized they have 3 speed trannies. Hope this help's! I understand the I-Phone frustration well!
Pigeonfarmboy just finished building the loader, http://rctruckandconstruction.com/sh...=pigeonfarmboy
Elliot build an articulated dumptruck, there was a motor discussion, http://rctruckandconstruction.com/sh...ghlight=elliot
And Joe, Lilgiant's mention's motor's in his thread, http://rctruckandconstruction.com/sh...ight=LilGiants Yes that's alot of reading, but great info to answer your question's
Later, Neil#2 aka doodlebug.

Re: rc digger gearing
 

hi thanks for reply I got it wrong it's the cat 345 digger link http://www.wedico.de/eng/cat345dlme.asp

Re: rc digger gearing
 

Ok, maybe somebody will chime in on track motor's, etc..
Later, Neil#2 aka doodlebug.