|
Spread Axle Race Trailer "The Rebuild"
Hey guys here is my 53 foot spread axle race trailer I built out of a Bruder drop trailer and A LOT of Alum.. I am missing some of my picks of the build but here is what I have.
Now I am not totally sure any more but I think i stretched the top deck out 6 inches and the lower deck out 10 or 12 inches I can remember. All the plastic was filled back in and the frame beefed up with alum angle. The upper alum frame is all angle and then the angle braces are just flat alum strap. All the alum is bolted together and this trailer can handle way way more weight then i can get in it. I have new alum rims I need to get installed on it still. http://i58.photobucket.com/albums/g2...y/IMG_1925.jpg http://i58.photobucket.com/albums/g2...y/IMG_1924.jpg The sides are made out of .080 sheet plastic as is the tailgate. the roof is set up so it comes off so you can see inside. http://i58.photobucket.com/albums/g2...y/IMG_1928.jpg http://i58.photobucket.com/albums/g2...y/IMG_1933.jpg http://i58.photobucket.com/albums/g2...y/IMG_1930.jpg The outside was done by the shop that does the body wraps on my work vans and he did a out standing job. the sides are all printed out then applied. http://i58.photobucket.com/albums/g2...y/IMG_1938.jpg http://i58.photobucket.com/albums/g2...y/IMG_1941.jpg http://i58.photobucket.com/albums/g2...y/IMG_1945.jpg http://i58.photobucket.com/albums/g2...y/IMG_1946.jpg http://i58.photobucket.com/albums/g2...y/IMG_1942.jpg Here is some video of the tail gate working. http://www.youtube.com/watch?v=CdWpcbTajLQ |
Re: Spread Axle Race Trailer
Great looking trailer!
|
Re: Spread Axle Race Trailer
Paul - I never knew it was built on a bruder platform - would have never guessed either. Great Work on the decal btw....
|
Re: Spread Axle Race Trailer
wow that turned out good! those little bruder wheels look even smaller on that stretched trailer.
|
Re: Spread Axle Race Trailer
Quote:
Quote:
Quote:
|
Re: Spread Axle Race Trailer
You just don't quit do you, Your stuff always amazes me. Fine job once again. Ben
|
Re: Spread Axle Race Trailer
An oldie, but a goody! I remember when you built that. A SUPER job.
By the way, we missed you and the boys (and the wife) at Indy last week. Alex (Dieselkid) told me that you were not coming and Alex himself had an abbreviated appearance himself. -Terry |
Re: Spread Axle Race Trailer
Hey Thanks much Terry.. I have to admit I did not know who FabOne was till I was talking to Alex today on the phone it is good to hear from yeah.. Yeah missing Indy stunk but just cant do it all it is too close to my bigest trade show of the year and now they are only a week apart instead of 2 weeks like before so. Maybe you guys can make it out to St Lewy.
|
Re: Spread Axle Race Trailer
SHOW OFF!! Another thing i overlooked when you were telling me what it was. that kw is so bad
|
Re: Spread Axle Race Trailer
Quote:
|
Re: Spread Axle Race Trailer
Great Looking Trailer Paul, Guess i need to get my butt in gear and finish the trailer i am attempting to build...........................
Need to dig up the pics and repost here i guess................ Edward |
Re: Spread Axle Race Trailer
Edward Thanks much they are great little trailers to build off of.
|
Re: Spread Axle Race Trailer
OK so I sold it and got lucky enough to buy to back "Thanks Keith" so I wanted to do to it what I planed on doing to it the first time and that is a pulling team trailer so I got started on it. I was raised on Case tractors so the 2590 was one of my favorite tractors on the farm so I found a team that was all case tractors and went from there. I had my decal guy get some red in the strips on the trailer to match the Reiks semi I built so here is where I am at.
http://i58.photobucket.com/albums/g2...wboy/026-6.jpg http://i58.photobucket.com/albums/g2...wboy/027-8.jpg http://i58.photobucket.com/albums/g2...wboy/028-6.jpg http://i58.photobucket.com/albums/g2...wboy/017-7.jpg http://i58.photobucket.com/albums/g2...boy/019-13.jpg Also been working on the inside got the lounge wall and door in with the diamond plate floor and lighting still have to get the bench and snap-on tool boxs in this weekend as well as a 4 wheeler and then on to the all the chicken lights.. http://i58.photobucket.com/albums/g2...boy/022-16.jpg http://i58.photobucket.com/albums/g2...boy/023-11.jpg http://i58.photobucket.com/albums/g2...boy/024-11.jpg http://i58.photobucket.com/albums/g2...wboy/025-7.jpg |
Re: Spread Axle Race Trailer "The Rebuild"
You got lucky..Not often can someone get back what they sold and make it look even better the second time around
Nice Job Alfy |
Re: Spread Axle Race Trailer "The Rebuild"
just wild love it TC. Wow you have built many that are on my favorits list but this one
just blows me away, just a great built. |
Re: Spread Axle Race Trailer "The Rebuild"
Paul that trailer is amazing, and the tractor...to cool. Liking the LED inside as well. Nice job, back home where it should be.
|
Re: Spread Axle Race Trailer "The Rebuild"
Looks awesome Paul, I'm glad you got that one back in your stable.
|
Re: Spread Axle Race Trailer "The Rebuild"
Quote:
Quote:
Quote:
Quote:
|
Re: Spread Axle Race Trailer "The Rebuild"
Paul I'm surprised the rear wheels are so wall to wall, I know they are 30.5-32 but it is still 1/16 scale, if it were a 1/14 puller tractor it wouldn't even fit.
Great job, nice to see a tractor that is not green, I like Deere but they are not the only tractor. |
Re: Spread Axle Race Trailer "The Rebuild"
I like the pulling tractor theme, Paul. A much better twist for someone into these RC trucks and equipment. I was going to comment that your model pulling tractor fits about as tight in your trailer, as they do in 1:1 scale! I've seen them with not much more then a few inches per side, from the tires to the trailer walls.
|
| All times are GMT -4. The time now is 04:38 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.