Wedico Loader with Bucket Teeth
 

http://i1240.photobucket.com/albums/...t/IMG_0691.jpg

http://i1240.photobucket.com/albums/...t/IMG_0678.jpg

http://i1240.photobucket.com/albums/...t/IMG_0679.jpg

http://i1240.photobucket.com/albums/...t/IMG_0676.jpg

http://i1240.photobucket.com/albums/...t/IMG_0675.jpg

http://i1240.photobucket.com/albums/...t/IMG_0674.jpg

Re: Wedico Loader with Bucket Teeth
 

nice lookin cutters. how do you like that loader?

Re: Wedico Loader with Bucket Teeth
 

Mitch here is a link to a How-to for posting photos on the forum so that they show up like this.

And Great work. ;)


http://i1240.photobucket.com/albums/...t/IMG_0691.jpg


http://i1240.photobucket.com/albums/...t/IMG_0678.jpg


http://i1240.photobucket.com/albums/...t/IMG_0679.jpg


http://i1240.photobucket.com/albums/...t/IMG_0676.jpg


http://i1240.photobucket.com/albums/...t/IMG_0675.jpg


http://i1240.photobucket.com/albums/...t/IMG_0674.jpg

Re: Wedico Loader with Bucket Teeth
 

Mitch,

I mounted my teeth on the upper side. I thought that way you should be able to skim the ground and get a relatively flat surface...

Have you used them in anger? Interested to hear your thoughts...

Cheers,
Andrew P.

Re: Wedico Loader with Bucket Teeth
 

Nice loader Mitch! Can we see a video of it in action?

Re: Wedico Loader with Bucket Teeth
 

Thanks for the replies and kind words. This loader has undergone many mods. From the electronics (ServoNaut) to the fasteners which are mostly from the aviation industry. To mount the teeth in the opposite fashion, seemed to be a great deal more work in order to make them flush. So, I chose the easy way out. It works great with all the servonaut and a LiPo battery. It has a BMA,SMT and SMX with a pico switch light relay for the beacon. In addition, I reworked the transmission (adding grub screws to the gears) to increase the reliability. :)

Re: Wedico Loader with Bucket Teeth
 

Mitch,
Could you please tell me where you found the bucket teeth

John

Re: Wedico Loader with Bucket Teeth
 

Hey I love the teeth the only thing I noticed is the teeth seem to be inverted they should be mounted inside the bucket as opposed to underneath

Re: Wedico Loader with Bucket Teeth
 

Re: Wedico Loader with Bucket Teeth
 

Found the Bucket Teeth on the PREMACON website. Also, I purposely installed the teeth in reverse to experiment with the "Digging" qualities. And I have a spare bucket (shown in pic) to install additional teeth in the proper direction. Everything I do is slightly un conventional.;)

Re: Wedico Loader with Bucket Teeth
 

Ahhhhh I didnt know that but now i see why but anyways nice loader

Re: Wedico Loader with Bucket Teeth
 

Nice teeth. I purchased some teeth from AFV a while back. I haven't installed them because I like the smooth bucket. So that leads me to my question. Were you able to purchase an extra bucket by itself? Or do you have two 966 loaders? I know that Wedico will not just sell a bucket. Unless something has changed.
That is awesome that you have converted this to the Servonaut and running on a Lipo. I think about it for my 966, but I have a list of other projects on my table. 3S lipo? Better speaker? How long can you now run the loader? Get back to me if you have a moment. No hurry, thank you for your time. Eddie

Re: Wedico Loader with Bucket Teeth
 

Very interestin idea on installing those teeth. It looks like it would be a bit of a chore to install. Please provide feedback on how the bucket works no teeth vs upright teeth vs upside-down teeth. I'd bet that it would dig much harder into hard pack with the teeth. I'm running a smooth bucket at the moment.
Paul

Re: Wedico Loader with Bucket Teeth
 

They work pretty well.. You can flick stones out and it does give a lot better results into solid ground.

Just don't expect miracles...

I have mine mounted on top... Just a pity that the loader arms don't drop enough to use a flat bucket on loading.

Cheers,
Ap