[kamyoncu]

ptebbe, sorry for late reply, tracks are plastics. I painted some of them individually some of them as a block.

Hello, Here is new updates

Everybody knows that there is a heat problem on hydrolic motor. I firstly tried to replace motor with another outrunner brushless one. nothing changed. I tried a 540 motor but it was not fit for hole. Than firstly I removed aluminium cover of leimbach and cutted rest of alumınıum coverage. So outrunner brushless (standart leimbahc motor) can breath and it provide later heatering. And than I changed my remote. I used futaba FC16 for it but, oldfasion remote do not give permission detailed mixing. I started to use turnigy 9x V2. And I mixed hyrolic servos and pump. Whenever I use servos or making movement on bucket or arm hydrolic start to work. So it save energy and prevent unwanted heating. There is some videos in youtube about mixing.

In addition, my friend upgraded no :3 stick, in standart there is not sping on it and it was very hard to find 0 position to stop crawler dozer. By the help of spring anymore it easly stops whenever I want.

I did not use any sound kit on it. Because truck sounds do not feel realistic, and I needed horn for it. I added a basic wedico horn on it.

I used 4s Lifepo on my carson and it was very big for it. therefore firstly I cut the rear weight and than I cut downside of driver seat. Anymore it is fit for my batery. 4200 mah 4s provide 2*3 hour play and more power than 12volt ni-xx and 11.1 volt lipos because it is 13.2 volt avesome!!!!

Photos is here video is uploading soon