Re: MFC -01
Hi...
Please plug the servos directly into the receiver and test them here.
Another test. If you plugged in the complete setup, please move the servo arms a bit manually before you switch on the truck. If you switch on the truck, they should be initialized and must move back to their initial position. If the don't do that, check the cables from the receiver to the MFC. Is there any damage on the cables ? Please recheck if the cables are plugged in the correct direction.
Maybe you can post a photo of the MFC and the receiver for further analysis ?
__________________
Greetinx
Peter
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|