Well it's been a while but I'm getting back into swing of things. Made a couple videos diggin some saplings growing on the side of my playpen. Haven't had time to upload but hopefully some internet time tonight. Just spent some time redoing the rx/tx settings to the lowboy trailer I mistakenly deleted a while ago.
Had to drain and rebuild the cylinders on the hoe, I used a neoprene backed washer to secure the Pistons to the rods. Found out the rubber material was not oil friendly and started to break down into small pieces. So anyone else using the rubber-backed washers from micro fasteners,,, they are not oil resistant. !! Perfect for my style of learning,,, learning what not to do then learning what works
. But the good news was all my seals were holding up and didn't need replacing but while it was apart I installed new. I bought 100+ oil o-rings for like $2 from McMaster. So the .20$ was no big deal, just hope no pieces got into valves. So far so good. And I have to get my but to work on some type of screening plant, get the conveyor working!! Lots of projects, lots to do!!! Should be getting back into the company business now!!! And will get some more videos soon.
Going to try and get to both showers coming up next month.