Howdy Joe......to bad I dont have any fan motors around like that,would almost fit....LOL....just need a long extention cord and never charge another battery.
I did run some red neck, high tech tests using a cordless drill though
....turns the pump at about 1400 RPM no load, at that RPM the pump is moving about 51cc / sec which is a bit more than I need, could slow it down a bit more.
2.2cc / rev X 1400RPM = 3080cc / min. Rember this is no load very little restriction in the system ( I did need to increase the intake hose to 5/16" ID hose, the pump did not like trying to pull that much oil through the 1/4" OD tubing which is what you see in this picture)
[IMG]
[/IMG]