Quote:
Originally Posted by skeeter
What size drill bit, & tap did you use? I'm going to have to fetch me one for my upcoming project.
|
I always keep a good supply of 2.5mm for drilling holes before using the M3 tap . along with a M2 tap and 1.5 drill bits for the chassis , along with 1/2/3/4/5mm and ect drill bits , a 6mm deburing bit for cleaning all hole or even when I need a counter sink hole as they come in handy for other holes on the chassis or cabs or custom stuff...
And two size sliding squares to mark the holes, then a centre punch so they are in the same location
Cheers Tracy