Thread: what do you need to run leimbach hydraulics?
View Single Post
  #10  
Old 02-01-2011, 03:08 PM
Lil Giants's Avatar
Lil Giants Lil Giants is offline
BANNED
  
Join Date: Aug 2010
Location: Saskatchewan
Posts: 4,431
Lil Giants has disabled reputation
Default Re: what do you need to run leimbach hydraulics?
To set the pressure? Sure Rob, very simple procedure. When you get your pump you'll see a black button head bolt on the side of the pump, remove that & the pressure screw is inside there. The torx screw is pushing on a spring forcing a steel ball into the return port restricting the oil flow back to the reservior. You don't have to turn it much to increase the pressure. The pump has to be OFF while adjusting the torx screw, install button head bolt before turning ON pump again.

If you're getting the pressure guage, screw the barbed fitting into the 2nd hole on the side of the filter can.
Last edited by Lil Giants; 02-01-2011 at 03:11 PM.
Reply With Quote