Re: The One Project
1/10 pulling sled.
I have been accumulating parts since fall of last year.
8' of 2"x1/4" al. flat
8' 1"x1" al. angle
10' ft of .25 chain,
4 different size sprockets
3' of 1/4" dia. steel for axles
handful of axle collars
set (4) tamiya duals
I haven't decided on bearings or bushings yet.
Otherwise the holdup on this project is the gearing calculations.
Hopefully the sled will be done this year.
Last edited by Hounddad; 06-08-2013 at 10:18 PM.
|