Thread: LR634 is HERE!!!!! Tracked loader
View Single Post
  #26  
Old 04-09-2014, 11:11 PM
avel avel is offline
Green Horn
  
Join Date: Mar 2014
Location: Kalispell, Montana
Posts: 228
avel is on a distinguished road
Default Re: LR634 is HERE!!!!! Tracked loader
Bent the crank back into shape as best as I could.

I replaced the grease in the drive motors, filed and sanded down the valve servos to fit. Finally figured out how to use ER9X on the transmitter. JB welded the bucket and some of the body. Lots of sanding. Painted the bucket and some of the body. Got frustrated with painting. Sanded, painted some more. Oh and finally broke my SD card for the camera, more tape and glue than plastic.





Here I mixed too much JBWeld so I thinned it with acetone, pressed a track pad into some regular clay and poured it in. Just for fun.


Phone picture
Last edited by avel; 02-04-2018 at 02:54 PM.
Reply With Quote