Re: Liebherr 922
Calum-
What you are trying to achieve is entirely do-able on your DX10. You simply have not configured your mixes completely right.
This requires 2 mixes for each stick direction, both turned on by the switch. The first mix has to completely negate the original control commands...set up the mix to be completely opposite of the original control. You've manage to set up your mix correctly for up and left, but not down and right. A simple tweak of the mix parameters will solve this.
This is my cancelling mix: Ele==>Ele -100% -100% and Ail==>Ail -100,-100
The second mix then adds the control to the stick that goes to the track drive.
(For some reason that I do not entirely understand, I had to set mine up such that the original Ele and Ail channels controlled the tracks, then the mixes over-rode it and mixed control to the dig-arm. Otherwise the drive motors would not stop even when the sticks were neutral.)
hope this helps.
Paul
|