View Single Post
  #5  
Old 08-21-2015, 06:02 AM
valtra103 valtra103 is offline
Newbie
 
Join Date: Aug 2015
Posts: 4
valtra103 is on a distinguished road
Default Re: 1/16 custom tractor from scratch

Thanks guys! I will do my best with this build


Rvjimd,

I decided to use traxxas shafts, because they are cheap and small enough. And quite realistic.
So naturaly i choose bearing blocks from traxxas too.

They are 1/16 parts, seen in lots of 1/16 traxxas models:

I will give links, but it is possible to find them cheaper and / or closer to you. For example in local RC stores. I normaly buy them from europe union countries for fast shiping, because I am from lithuania.

Traxxas:
Axle carriers / bearing blocks

Axles

Shafts I used to connect diff (had to buy two sets, to get 2 pairs of shortest)
And used a few yokes from some shafts to mod ZD diff outputs.

Bearings

Hexes (I sugest buying aluminum version)

There of course is lots of upgrade parts, like metal shafts, metal bearing blocks etc. So for bigger tractor I would use aluminium blocks, and traxxas differentials.
Good way to choose parts is to download manuals of 1/16 traxxas. Like Slash, E-revo, Summit.

I can't find ZD diffs anymore. I bought them for low price. They vere like 5 usd a piece. And quality is quite good.

Last edited by valtra103; 08-21-2015 at 06:09 AM.
Reply With Quote