Thread: Two esc in receiver.
View Single Post
  #2  
Old 02-19-2018, 10:35 AM
bigford's Avatar
bigford bigford is offline
Big Dawg On The Bone
  
Join Date: Oct 2010
Location: mastic beach,ny
Posts: 2,018
bigford is an unknown quantity at this point
Default Re: Two esc in receiver.
You need to join the power wires together red to red black to black. Then disconnect one red servo wire from
The esc plug. I would make the esc with the red wire still connected the motor esc and the other for the pump
Reply With Quote