Thread: Leds using a old servo board question
View Single Post
  #1  
Old 12-02-2017, 10:24 PM
Cossett's Avatar
Cossett Cossett is offline
On Leave
  
Join Date: Aug 2010
Location: Sydney Aus
Posts: 1,383
Cossett is a jewel in the roughCossett is a jewel in the roughCossett is a jewel in the roughCossett is a jewel in the rough
Default Leds using a old servo board question
Im planing on making my own roof clearance lights and using a old servo board to turn then on / off and my question is -
When wiring up the leds as I plan on having then on there own wired to male plugs and then soldering the female wires into 1 pos and 1 neg lead so each led can be removed seperately, do I still need a resistor for each led as Im keeping the potentiometer attached to the servo board ?
The led will be either white or orange but havent decided on the color yet and what is the max number or leds you can run from a servo control board ?

Cheers Tracy
__________________
RIP FreddyGearDrive 2-12-59/12-19-11
Love my Kenworths

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote