Hello all,
Finally I got the time to start the already promised thread about my grader build. Having started the planning in 2005 this is already a long time project bound to take still quite some years to finish. So expect some frequent postings until I catch up with the present state of things and thereafter... hmm, you´ll probably need some patience
*. Anyway, here some basic model data:
Scale . . . . .: 1:8
Length . . . .: 1222 mm (48") over front wheels
Width . . . . : 363 mm (14.3")
Height . . . . : 408 mm (16")
Moldboard
Width . . . . : 533 mm (21")
Height: . . . : 85 mm (3.4")
Tires
Diam. . . . . : 185 mm (7.3")
Width . . . . : 70 mm (2.75")
Weight : 40 to 50 kg (88 - 110 lbs) (estimated depending on equipment)
Material: Mainly stainless steel, some brass
Drive: Electric 200 W (planned).
All hydraulic, 10 circuits + 5 for implements, max pressure estimated 40 bars (580 psi).
Radio not yet decided, but will need to control some 30 functions.
Here some CAD drawings for a first overview:
Stefan
*) If you read some German and can´t wait you could also visit
this forum for the latests additions
.
Edit: Sorry to say, the picture links in posts #1 to #263 have been broken due to a takeover of the cloud service provider
. I managed to save the pics to another, hopefully more reliable provider, but the work to repair the links turns out to be very tedious, and will take quite some time.