Found myself with free time yesterday so made some progress on the bumper.
First needed to paint in the indicators.
Next glue in the nails holding the head light protection
Clip the copper nails off as close as possible
Insert the provided plastic to function as the headlight glass and install the headlights.
Install the LED board. Only held with one screw.
Then the rest of the bumper parts
The step bar clips in the 4 provided holes. Supposed to be glued in place but was a very tight fit.
The number plate holder goes in at the back of the bumper.
Next the handle and pin are inserted
Numberplate clipped on and the 10 plugs inserted.
Inside grillwork
The number plate will need to be unclipped and removed to accommodate the spacers of the heavy duty front coupling.