I think I'll have the skid plates done by weekend. Have to weld two pieces yet. But this is what I've come up with so far. I have a 2-56 broken tap in one of those holes and I over tightened a brass 2-56 screw trying to get the metal to lay a little more flat and twisted the head off. More work!! I'm going to mill out the tap and drill out the brass then I'm going to try that aluma-weld stuff. If that does the job I'll be able to re drill and tap new holes. It just adds more time and the p.i.t.a. Aspect.
. Have some materials for hydraulics coming later in week, so I guess I'll be needing to get valves and pump soon. I think the pump and valves will be the bullet-biting expense. Once I get my fingers on one I'll try and make my own for other projects.