Re: Unit Cable Hoe
Quote:
Originally Posted by SmallHaul
Well, here is what I am thinking... The crowd drum on my doepke dragline has enough power to fairly easily pull the entire crane up hill on (free wheeling on its wheels) and that is one 200oz inch servo. So, I figure if I have one 200oz inch servo on each track that should be more than enough power to propel the entire crane up a steep hill. Worst case scenario is the 200oz inch servos are not strong enough and then I'll just have to swap them for Hitec 7955tg servos (well over 300oz inches of torque @ 6volts) that cost $100 a piece. I have one of these servos in my Mack dump truck running the dump mechanism and the servo has so much power that even if you overload the bed with dirt the servo doesn't even sound like it is working hard to lift & dump it.
|
WOW... Scott speaks Greek Or at least that's what I am hearing.
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Mike "DREAMWEAVER" Johnson
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
RIP FreddyGearDrive 2-12-59/12-19-11
Rims and Tanks by ihbuilder / Grill and Visor by Brian in PA / Mirrors, Front and Rear Bumper, Back of Cab Lights, and Steering Arms by tc1cat / Fenders by Stylin n Profilin / Frame Rails by The Late Freddy Gear Drive
|