Part 2
Other side
Prepping to put the parts together
Here missed some pics - got distracted by the cats who caught some critter and let it loose in the house.
Missing step is screwing the lower part of the dashboard on.
Prep the whole console for installation in the cabin. Gets attached with 2 M3x6. Lazy and just took the ones that were used for painting.
Installed. The left one had to be removed otherwise can not get the console in place. Getting that one screw in is about the most difficult part of this whole job.
Now the seats go in. Also install screws before inserting in cab. Slots are provided for that in the base
Next is the mirrors and other miscellaneous bits. I didn't take pictures here because it all gets glued together with super glue. Don't like working with it as it sets fast and you can't afford mistakes.
Not a difficult job really. Here is picture of the page in the manual
Part of the mirrors were labeled wrong. The bigger part of the main mirror needs swapping L en R. Pic is of the left mirror. The mirrors can be adjusted.
That's the driver's cabin done with. Now back to the more interesting bits which is finishing the hydraulics. Probably start on that later in the week.