Re: 5 stage hydraulic clyinders
Quote:
Originally Posted by trewq
Is anyone having any experience with multistage cylinders made out of brass? I've actually made one for Doggy's 3 axis halfpipe but I've never installed and tested it. I have other priorities now...
|
http://www.rctruckandconstruction.co...t=9048&page=87
I made a test one from brass then the final from stainless. Mine are double acting , both ports in bottom, telescopic. Have been wanting to use 1/32 o rings to make seal walls even thinner. As of now I believe I used 1/16" and for the project I did I only needed two stages. But the application would be same.
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|