Check out posts 42-44 in the link below to see what I did, if you look close you'll see that I took the lower rear case screw off the transmission. You will have clearance issues if you don't lift the trans mission which will be the case with any t-case you use. I'm not a fan of the Tamiya 3 spd due to its space sucking size, so this one is going away soon. You might also notice the spring pack on my steer axle
. The extra height was in my favor but not so much in yours.
http://www.rctruckandconstruction.co...?t=9138&page=3