Quote:
Originally Posted by Buster
When I connect the receiver first and then turn the TRX on, the pump turns the wrong way.
When I first turn the TRX on with the throtle switch in the "on" position the display shows an switch error, when I put the switch in the off position then the message on the display disappears but when I connect the receiver and switch the throtle switch to the on position the pump runs in the wrong direction.
If I start the TRX with the throtle switch in the right (off) position and connect the RX the pump motor then turns in the right direction.
I think this is the correct startup procedure.
Erwin
|
I know it sounds dumb but is the white wire in the position closests to that of the main portion of the rx?