Re: 1/10 Liebherr Excavator R 984 Litronic
Joe, this last bolt received a small drill mark with a center drill on the lathe. Just find this one and remove the pad.
first i cut off all cubes (4.5 by 4.5mm) with a parting tool; then I used a homemade chuck for finishing one ofter the other. It took me round about 2 minutes/ average per nut - over 26 hours total! The tubings and bolts were a piece of cake compared to this!
The chain is just thrown over the beams for the picture, the rollers are missing here. With rollers in place the chain got more tension, there is less hanging as you can see here. But it's recognizable.
|