Quote:
Originally Posted by thuangs
Thanks for sharing Markus!  These parts look extremely beautiful!  I also found it difficult to do cooper blazing with different material, i.e. my cylenders are made with SS304 but tube was cooper. Even I heat it to extreme high temperature, join won't hold very well. But yours are all the same...blazing result shoudl be good.
I am a big fan of your R984C!
Best regards,
Kevin |
@Kevin
Hi, what kind of soldering/ brazing? Silver or soft? Did you use any flux?
@Joe
well, yes... the bucket...
don't forget the chains
let me just throw in the counter weight. It was milled from a solid Aluminum block 410x180x80mm with a weight of 16Kg. The finished Block is round about 5Kg and way too light. It will receive some inlays from lead to bring it to the necessary weight again. I try to bring it up to 17Kg. First some drawings, you can see the lead blocks inside the weight, how it should be finished and right from the mill.