Thank you very much for the compliments.
After messing with ferrite rings and a list of other changes I discovered that the glitching issues the dump drive was having were caused by the 645 steering servo. It works flawlessly on it's own and as soon as I unplug it from the rx the dump motor stops messing around so I swapped it out for a 485. I am guessing that the problem is more to do with the Sabertooth's 1amp BEC than the servo itself. My KH runs the same ESC but different servos. It has issues when both steering and shift servos are struggling but it just stops until the esc resets.... Stupid electronics....or maybe just stupid installer...lol