Swing drive esc, I started with a Banebot 12v brushed esc, works great for Leimbach pump control & trks for/rev, but not good for 450 swing drive, too jerky.
So then I try today a Mtronics Viper Marine 15... it’s very smooth in trks & works great for Wedico pump control too... but here lies the mystery? Swinging right, esc works correct, very smooth & fine control. But swinging left activates track motors. Just move tx lever ever so little to swing left very slow & the track motors (both sides) go backwards at approx 1/3 speed. Swing full speed left & the track motors stop. I triple check all my wiring, radio settings, swing ch not mixed with any ch, I even changed AR9020 receivers, I can’t find any reason for this to happen.
Have anyone ever had two different brand esc’s work in sync before? Operating the Roxxy brushless esc's for tracks didn't affect the swing at all.
I put a Servonaut S20 esc in now for swing, everything works separately as it should.
