RC Truck and Construction  

Go Back   RC Truck and Construction > RC Truck's Ag and Industrial Equipment and Buildings > Construction Equipment

Construction Equipment If it digs, pushes, hauls dirt "off road" post it here.


Reply
 
Thread Tools Display Modes
  #1  
Old 01-29-2015, 06:04 PM
73blueblazer 73blueblazer is offline
Newbie
 
Join Date: Jan 2015
Location: Michigan
Posts: 16
73blueblazer is on a distinguished road
Default Steel excavator build

Hi everyone, my names Justin alittle about me I'm 29 live in michigan and I work as a draftsman so I have lots of mechanical experience. So I've been following everyone's post for the last year and a half and I'm finally ready to build my own excavator. I started with a plastic FastLane toy for my pattern but I realized that's not what I want so I found a cad file of a excavator and scaled it to around 1:14 scale. Then I started with a sheet of 22ga steel but I'm thinking it might be too thin. What is a good gauge of steel to use 20ga or 16ga? I want to tack weld it together and braze the seams together. Polly just use k1 links for tracks and rc4wd for hydraulic components until I can afford to get autocad and out source my machining to my uncle. I also bought a Big Farm dump truck I plan on converting or building from scratch later on. Do you have any recommendation for my excavator build? I will post pics of progress soon as I figure out how to.
Reply With Quote
  #2  
Old 01-29-2015, 06:33 PM
73blueblazer 73blueblazer is offline
Newbie
 
Join Date: Jan 2015
Location: Michigan
Posts: 16
73blueblazer is on a distinguished road
Default Re: Steel excavator build

Cad file
Attached Images
File Type: jpg image.jpg (52.9 KB, 144 views)
Reply With Quote
  #3  
Old 01-29-2015, 06:36 PM
73blueblazer 73blueblazer is offline
Newbie
 
Join Date: Jan 2015
Location: Michigan
Posts: 16
73blueblazer is on a distinguished road
Default Re: Steel excavator build

22ga bucket
Attached Images
File Type: jpg image.jpg (83.6 KB, 119 views)
Reply With Quote
  #4  
Old 01-29-2015, 07:48 PM
woodhog's Avatar
woodhog woodhog is offline
Journeyman
 
Join Date: Nov 2010
Location: Columbia TN.
Posts: 586
woodhog is on a distinguished road
Default Re: Steel excavator build

Looks like you got a good start! The body won't matter what gauge you use just use what you can work with the best The heavier the easier it is to stay in place while digging.
__________________
Woodhog
Reply With Quote
  #5  
Old 01-29-2015, 07:50 PM
Lil Giants's Avatar
Lil Giants Lil Giants is offline
BANNED
 
Join Date: Aug 2010
Location: Saskatchewan
Posts: 4,431
Lil Giants has disabled reputation
Default Re: Steel excavator build

I use 20ga & mig weld with 023 wire... I just got a tig recently, haven't learned to use it yet.
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get!

Joe
Reply With Quote
  #6  
Old 01-29-2015, 08:44 PM
Izzy's Avatar
Izzy Izzy is offline
Backyard enginier
 
Join Date: Aug 2010
Location: Shipshewana, Indiana
Posts: 1,825
Izzy will become famous soon enoughIzzy will become famous soon enough
Default Re: Steel excavator build

I used 22ga for body work ( no welding though) and 16 GA for non threaded structure items. 13 GA and up depending thread type.

First dozer used 11ga for main body just to add weight.


Watch your gage due warping from heat buildup during welding. All thin gages come from heavier hot rolled....
Izzy
Reply With Quote
  #7  
Old 01-29-2015, 11:07 PM
73blueblazer 73blueblazer is offline
Newbie
 
Join Date: Jan 2015
Location: Michigan
Posts: 16
73blueblazer is on a distinguished road
Default Re: Steel excavator build

Thanks for all the information. Here's my welding cell I made from an old gas furnace I have the hose I stick out the window and have a 6" inline fan I only have my spare room to work in for now till summer time for a garage.
Attached Images
File Type: jpg image.jpg (29.2 KB, 138 views)
Reply With Quote
  #8  
Old 01-31-2015, 01:05 PM
73blueblazer 73blueblazer is offline
Newbie
 
Join Date: Jan 2015
Location: Michigan
Posts: 16
73blueblazer is on a distinguished road
Default Re: Steel excavator build

Playing with photo bucket
Attached Images
File Type: jpg 67A40259-81C6-44FC-815A-E2918CDEFB6D_zpsbspzwc8l.jpg (62.6 KB, 85 views)
Reply With Quote
  #9  
Old 01-31-2015, 02:00 PM
Rimrock Rimrock is offline
Wannabe
 
Join Date: Jul 2013
Location: Western NO
Posts: 355
Rimrock is on a distinguished road
Default Re: Steel excavator build

It's practical to build the 'engine house' cover as 1 big piece, that is easily removable for good access. One can have separate smaller hatches/doors in the main cover.
Track sprocket wheels should run about 30-40 rpm. Superstructure to rotate about 10 rpm.
Looking at your sketch, I would maybe get some more clearance between the tracks and the bottom of 'engine house'/superstructure, like double it?
Reply With Quote
  #10  
Old 01-31-2015, 03:07 PM
Lil Giants's Avatar
Lil Giants Lil Giants is offline
BANNED
 
Join Date: Aug 2010
Location: Saskatchewan
Posts: 4,431
Lil Giants has disabled reputation
Default Re: Steel excavator build

Quick tutorial showing how to use photobucket.

http://www.rctruckandconstruction.co...ead.php?t=4057
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get!

Joe
Reply With Quote
  #11  
Old 01-31-2015, 05:28 PM
73blueblazer 73blueblazer is offline
Newbie
 
Join Date: Jan 2015
Location: Michigan
Posts: 16
73blueblazer is on a distinguished road
Default Re: Steel excavator build

Rim rock yea I'm not going to follow it to a Tee I just wanted something to base my model off of I'm not looking for any particular machine this is my fist build ever. I found lowes sells 2 foot x 2 foot 16ga I think I'm going to pick some up tomorrow.

Lil giants thank you it's hard to figure things out on my phone.
Reply With Quote
  #12  
Old 01-31-2015, 05:43 PM
73blueblazer 73blueblazer is offline
Newbie
 
Join Date: Jan 2015
Location: Michigan
Posts: 16
73blueblazer is on a distinguished road
Default Re: Steel excavator build

Reply With Quote
  #13  
Old 01-31-2015, 05:46 PM
73blueblazer 73blueblazer is offline
Newbie
 
Join Date: Jan 2015
Location: Michigan
Posts: 16
73blueblazer is on a distinguished road
Default Re: Steel excavator build

http://
Reply With Quote
  #14  
Old 01-31-2015, 06:01 PM
73blueblazer 73blueblazer is offline
Newbie
 
Join Date: Jan 2015
Location: Michigan
Posts: 16
73blueblazer is on a distinguished road
Default Re: Steel excavator build

While I'm not far in my build would you start with the bucket and boom or the tracks then boom? I don't have any hydraulic items yet I'm affair of building the body too small what's a front to back and side to side dimension I could use? I'm working with limited tools at this time but I want to get started building cause I know the basics of what I need and buy pumps and cylinders as I go.
Reply With Quote
  #15  
Old 01-31-2015, 07:25 PM
Lil Giants's Avatar
Lil Giants Lil Giants is offline
BANNED
 
Join Date: Aug 2010
Location: Saskatchewan
Posts: 4,431
Lil Giants has disabled reputation
Default Re: Steel excavator build

What size life size machine do you intend emulate...30ton machine, 50ton, 80t?

I use a phone to browse on occasion away from home, but always use laptop to post.
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get!

Joe
Reply With Quote
  #16  
Old 01-31-2015, 07:49 PM
73blueblazer 73blueblazer is offline
Newbie
 
Join Date: Jan 2015
Location: Michigan
Posts: 16
73blueblazer is on a distinguished road
Default Re: Steel excavator build

I'm not familiar with the different tonnage I'm think just an average size.
Reply With Quote
  #17  
Old 02-07-2015, 07:31 PM
73blueblazer 73blueblazer is offline
Newbie
 
Join Date: Jan 2015
Location: Michigan
Posts: 16
73blueblazer is on a distinguished road
Default Re: Steel excavator build

Just wanted to say it's going to be a week or two before I start building I sat down started to price out how much everything's going to cost and I decide cause I want to build multiple vehicles that I should buy some more tools to make it easyier and more cost effective in the long run. So I borrowed money from myself I'll pay myself interest in the end. But I bought 16ga and am happy with the gauge but realized it's going to be hard to cut so I purchased a shear with 12" throat from northern tool. I also bought a laptop and turbo cad 2d/3d so I can design before I build. And I'm thinking about purchasing a Sherline lathe so I can make bushings and hydraulic cylinders ect... So hopefully I'll be building again soon
Reply With Quote
  #18  
Old 02-12-2015, 08:33 PM
73blueblazer 73blueblazer is offline
Newbie
 
Join Date: Jan 2015
Location: Michigan
Posts: 16
73blueblazer is on a distinguished road
Default Re: Steel excavator build



Got my sheet metal shear I highly recommend to anyone have trouble cutting thick sheet metal I cut a piece of 1/8" thick 1" wide easily I need a better bench for thicker stuff says you can do 1/4" sheet but idk it's 16ga cuts like butter



I got playing around bucket 2.0version 16ga cut with shear only and sanded a little. Now I'm only waiting for cad software.

Last edited by 73blueblazer; 02-12-2015 at 08:36 PM.
Reply With Quote
  #19  
Old 02-13-2015, 03:35 PM
73blueblazer 73blueblazer is offline
Newbie
 
Join Date: Jan 2015
Location: Michigan
Posts: 16
73blueblazer is on a distinguished road
Default Re: Steel excavator build

Started following my print all 16ga so far.

Reply With Quote
  #20  
Old 02-14-2015, 05:58 PM
73blueblazer 73blueblazer is offline
Newbie
 
Join Date: Jan 2015
Location: Michigan
Posts: 16
73blueblazer is on a distinguished road
Default Re: Steel excavator build

I wasn't sure how I was going to assemble the boom here's what I came up with this morning I built some saddles to get me started.



Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:20 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.